Filter
Top Products
EN
EN
5
Before You Begin
Insert batteries into the
player
1. Remove the battery door by applying
thumb pressure, then lift the battery
door out and off the cabinet..
2. Insert a “AAA”battery with
polarities corresponding to the
indications on the compartment.
(Refer to “Before You Begin” for
important battery information.)
3. Close the door of the battery
compartment.
Using Headphones
Insert phone plug into the headphones
jack ( ) on the back of player for
listening.
Have a Blast- Just Not in Your Eardrums.
Make sure you turn down the volume on
the unit before you put on headphones.
Increase the volume to the desired level
only after headphones are in place.
Note
Refer to the power level indicator on
display for battery level.
Replace with new batteries when the
indicator is empty. Refer to “Display
Overview” on page 11.
6
Connecting the Lyra Player
to your Computer
1. Lift the rubber cover that is covering
the USB socket on the player.
2. Insert the USB plug of the player into
the USB socket on the computer
tightly.
Note
Refer to the Software Instruction
manual for procedures in setting up
USB drivers and transferring files
to the player.
Before You Begin
PDP2352_6 EN 3/21/05 10:38 AM Page 16