Filter
Top Products
16
EN
15
EN
3. Select Options from Options menu in
the Burn window.
4. Select Settings to display Burn set-
tings.
5. Click on the General folder.
Make sure “mp3 disc” is selected under
Disc type at Startup.
6. Click on the mp3 folder.
Make sure Add MultiAudio Tracklist
(MAU) box is checked.
7. Click OK when finished.
MusicMatch Jukebox
Troubleshooting
Troubleshooting Tips
No power, does not work?
• Batteries may be inserted incorrectly.
• Batteries may be empty. Recharge
(only Ni-Cd/Ni-MH battery) or replace
new batteries.
• Connection may be loose if using
AC/DC transformer.
Disc cannot be played?
• Disc may not be inserted correctly with
label side facing upward.
• CD-RW (or CD-R) disc may not be
recorded properly.
Skipping tracks or bad sound quality?
• Disc may be dirty or scratched badly.
• Disc lens may be dirty and need clean-
ing.
• There may be strong magnetic fields
(e.g. too close to TV) near the unit.
Cannot play mp3 disc?
• Clean the disc.
• Make sure files are saved under .mp3
extension. e.g. Rocky08.mp3
• Check that the recorded bit rate is with-
in 32kbps and 320kbps.
• Only audio CD track will be played in
mixed mode disc.
Cannot play WMA songs?
• Check that the WMA bit rate is within
64 kbps and 192 kbps and sampling rate
is within 44 kHz and 48kHz.
• DRM not supported.
The display shows strange characters?
• Check that file names are created using
the ASCII-ISO 8859-1 (Latin - 1) Table.
PDP2069 EN 4/17/03 4:57 PM Page 22