Filter
Top Products
7
FM RECEPTION STATION PRESETS
DAB and FM presets
Your radio can store up to 10 of your favourite stations as
presets on both the DAB and FM bands for quick recall.
To store a preset
Tune to the station you want to store as a preset.•
Press and • hold the PRESETS button.
A preset number will be displayed on the bottom line of the
display.
To choose a preset location to store your station, turn •
the VOLUME/SELECT knob to nd your preferred preset
number, then press the JOG MODE/SELECT button.
When you store a preset, the display will read ‘PRESET SAVED’
to conrm the number you selected.
NOTE: You can choose a preset number that is already in use.
The new station details will over-write the stored station.
To recall a preset
Press the • PRESETS button.
Turn the• VOLUME/SELECT knob to nd the preset
number you want.
When you nd the preset station you want, stop •
browsing the preset list and the radio will tune to the
selected station.
NOTE:- Your radio may have been pre-programmed with a
selection of DAB station presets. If so, these stations will be
listed on a label xed to the front panel.
SELECTING A DAB STATION
The stations are stored in an alphanumeric list.
To select another station
Press the • JOG MODE/SELECT button to switch to tuning
mode.
‘Station List’ appears on the display.
Turn the • VOLUME/SELECT knob to browse through the
list of station names on the display.
When you nd the station name you want to listen to, •
press the JOG MODE/SELECT button.
Your radio can also receive FM band radio stations.
To change to the FM band
Press the • DAB/FM button.
To auto-tune to FM stations
Press and • hold the JOG MODE/SELECT button to tune to
the next station in the band.
Searching... will appear on the display and the radio will start
to search. Tuning will stop automatically when the station is
reached.
To manually tune to FM stations
Press the • JOG MODE/SELECT button briey to select
manual FM tuning mode.
<TUNING> appears on the display.
Turn the • VOLUME/SELECT knob to tune manually up or
down the band and search for a station.
STEREO/MONO RECEPTION
You can set your radio to switch automatically between stereo
and mono FM reception (AUTO mode) or to receive in mono
only (MONO mode). Setting to mono mode may improve
sound quality in areas where a weak aerial signal results in
a high level of background noise.
To switch between FM AUTO and MONO modes
Press the• MENU button.
The legend ‘Auto’ or ‘Mono’ will be displayed to indicate which
mode is set.