Filter
Top Products
6
CONNECTING TO THE AUX JACK
A cable is supplied to connect other sources with Line out or
Headphone jacks to the AUX input of your docking station.
These sources could include -
iPod models other than iPhone or iPod touch.•
Other types of MP3 personal audio players.•
Personal CD players. •
To connect a source via the AUX cable:
Connect one end of the AUX cable (supplied) to the •
Headphone jack of the player.
Connect the other end of the cable to the AUX-in jack •
located on the back panel of the Docking Station.
SOUND SOURCES
You can choose to listen to a docked iPhone/iPod touch or
to another iPod model or personal stereo connected via the
AUX cable.
Selecting a source:
Press the • (Standby/Source) button repeatedly to
switch between iPod and AUX sources.
The source playing will change and the clock display will briey
show the source name (iPod or AUX) before reverting to clock
display.
NOTE:- The iPod source (for a docked iPhone/iPod touch) can
only be selected when an iPhone/iPod touch is docked.
SELECTING A SOURCE
STANDBY CONTROL
To turn the docking station on:
Press the • (Standby/Source) button briey.
The unit will switch on.
To turn the docking station o:
Press and • hold the (Standby/Source) button.
The unit will switch o.
POWER CONTROL ADJUSTING THE VOLUME
To increase the volume:
Press the • P button on the control panel.
To decrease the volume:
Press the • O button on the control panel.
When the volume is adjusted the display will change to show
the current volume setting on a scale of 0 to 40.
NOTE: When playing a source connected to the AUX input via
the headphone jack, the volume control must be turned up
on the source.
OPERATING THE iPhone
When playing, the iPhone/iPod touch controls are used to
navigate menus and choose programs etc.
The Docking Station controls are only used to set volume.
CHARGING THE iPhone
An iPhone or iPod touch will charge when it is docked and
the docking station is set to Standby or when the Aux source
is selected.