Filter
Top Products
9
VIDEO CONNECTION
Your docking station includes a video output jack to feed video
signals to a TV from an iPod which has video capability.
NOTE:- The TV must have a composite video (CVBS) video
input.
To connect the docking station to a TV:
Connect the video cable (supplied, with yellow plugs) to •
the Video Out jack on the back panel.
Connect the other end of the cable to a Composite video •
(CVBS) input of the TV. A suitable input will often be
located under a ap on the front or side of the TV. The
video input jack will be coloured yellow.
VIDEO PLAYBACK
Switching on the iPod video output:
Before viewing photo or video programs on your TV you
will need to switch on the iPod video output. The iPod video
output selector is generally found as follows -
Navigate to the ‘Videos’ or ‘Photos’ menu of the iPod.•
Select ‘Settings’.•
Select ‘TV out’.•
Set ‘TV out’ to On.•
The video signal from the iPod dock connector will now be
enabled.
Selecting the correct input on your TV:
Set the TV input selector to the AV input that you used •
when connecting the Video cable.
Playing the video:
Using the remote control, navigate to select the video •
you want to watch on the iPod display and set it to play.
The picture will play on the TV and the sound will play from
your docking station.
Typical video connection to a TV