Filter
Top Products
Definition Install iw60 EFX
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
Tannoyadoptsapolicyofcontinuousimprovementandproductspecificationissubjecttochange
DefinitionInstalliw60EFXdatafile//issue1.06//15.01.08
T
he loudspeaker shall consist of one 165mm (6.50”) full range, point source Dual Concentric™ for Music Mode and two further 100mm (4.00”) full range,
p
oint source Dual Concentric™ transducers in dipole configuration for Cinema Mode. The low and high frequency elements of the Dual Concentric™ shall be
c
ombined by an internal passive crossover network operating at 1.6kHz, with dynamic HF protection.
Performance of the loudspeaker, without any electronic control, shall meet or exceed the following criteria: Frequency range measured at 1 metre on axis
with swept sine wave shall be 74Hz to 27kHz. Sensitivity shall be at least 90dB (anechoic) for 2.83 Volts @ 1 metre and shall be capable of producing a
peak output level of 116dB (anechoic) on axis at 1 metre. The nominal coverage angles of the loudspeaker shall be 90 degrees conical in music mode and
120 degrees horizontal by 90 degrees in cinema mode. The system shall have a nominal impedance of 8 Ohms in music mode and 4 ohms in cinema mode.
The maximum power handling shall be 200 Watts (programme).
The enclosure shall be an optimally tuned 11.50 litre closed MDF construction finished in textured black paint ands supplied with a white powder coated
perforated steel grille. Connectors shall be gold plated spring terminals. Controls shall be a mode selection input activated by a 12V DC relay via a Dinkle
c
onnector and a polarity switch.
The enclosure shall not exceed the following dimensions: 590 x 345 x 94mm (23.23 x 13.58 x 3.70”) (H x W x D).
The in wall loudspeaker shall be the Tannoy… Definition Install iw60 EFX.
Architectural specifications