Filter
Top Products
Di6 DC
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
Tannoyadoptsapolicyofcontinuousimprovementandproductspecificationissubjecttochange
Di6DCdatafile//issue1.06//15.01.08
TECHNICAL SPECIFICATIONS
System Di6DC / Di6DCt
Construction
F
requency Response (-3dB)
(
1)
7
5Hz -30kHz
Frequency Range (-10dB)
(1)
55Hz - 35kHz
S
ystem Sensitivity (1W @1m)
(
2)
8
9dB (1W = 2.83V for 8 Ohms)
Dispersion (-6dB) 90 degrees conical
D
river Complement
Low Frequency 1.00 x 165mm (6.50")
Dual Concentric
TM
c
onstant directivity driver with
m
ulti fibre paper pulp cone
High Frequency 25mm (1.00") titanium dome
with neodymium magnet system
Crossover 1.6kHz - 2nd order LF,
2nd Order HF
(with dynamic HF protection)
Directivity Factor (Q) 5.6 averaged 1kHz to 10kHz
Directivity Index (DI) 7 averaged 1kHz to 10kHz
Rated Maximum SPL
(2)
Average 109dB
(107dB- 60Wtapping on transformer)
Peak 115dB
Power Handling
Average 90W
Programme 180W
Peak 360W
Recommended Amplifier Power 180W @ 8 Ohms
Nominal Impedance 8 Ohms
Di6DCt - Transformer Taps (bottom rotary switch)
70V 60W /30W/ 15W / 7.5W /OFF
& low impedance operation
100V 60W/ 30W /15W/ OFF
& low impedance operation
Distortion
10% Full Power (8.0V) 2nd Harmonic 3rd Harmonic
250Hz 1.00% 0.32%
1kHz 0.18% 0.32%
10kHz 1.00% 0.18%
1% Full Power (2.5V) 2nd Harmonic 3rd Harmonic
250Hz 0.25% 0.25%
1kHz 0.06% 0.18%
10kHz 0.45% 0.14%
Enclosure High Impact Polystyrene (HIPS)
rated IP64 to EN60529 (IEC529)
Grille Steel, with weather resistant coating
Finish Textured Black or White paint
(custom trim colours can be supplied pre-fitted
t
o special order - minimum order quantity applies)
Connectors Euroblock type removable locking connector
with screw terminals with "loop through" facility
F
ittings 1 x K-Ball™ Bracket Socket
2 x M8 yoke bracket inserts
S
upplied Yoke bracket
Accessories
Optional Pole mount adaptor
Accessories K-Ball™ pre-wired multi angle bracket
Dimensions 357.5 x 230 x 223.2mm (H x W x D)
(14.08 x 9.05 x 8.79”) (H x W x D)
NET Weight 5.5kg (12.12lbs)
Notes:
(1)Averageover statedbandwidth. Measuredat 1metre onaxis.
(2) Unweightedpinknoise input,measured at1 metre inananechoic chamber
Afullrange ofmeasurements, performancedata, CLFand Ease™Datacan be
downloaded fromwww.tannoy.com
Full independentverificationof publishedspecifications carriedout byNWAALabs,
California canalsobe obtainedfrom thedownloads section ofwww.tannoy.com
Tannoyoperates apolicy ofcontinuous researchanddevelopment. Theintroduction
of newmaterialsor manufacturingmethods willalways equalor exceedthe
published specifications,whichTannoy reserves theright toalter withoutprior
notice. Please verifythe latestspecifications whendealing withcriticalapplications.
8001 4040 Di6 DC Black 2 7.0 (15.4lb)
8001 4041 Di6 DC White 2 7.0 (15.4lb)
8001 4050 Di6 DCt Black 2 7.5kg (16.53lb)
8001 4051 Di6 DCt White 2 7.5kg (16.53lb)
PART NUMBER PACKED WEIGHTPACKED QUANTITYCOLOURMODEL NAME
Ordering Information