Filter
Top Products
Definition Install DC8i
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
anfragen@tannoy.com
E: ventes@tannoy.com
Tannoyadoptsapolicyofcontinuousimprovementandproductspecificationissubjecttochange
DefinitionInstallDC8idatafile//issue1.06//15.01.08
T
he loudspeaker shall consist of a 200mm (8.00”) full range, point source Dual Concentric™ transducer. The low and high frequency elements shall be
c
ombined by an internal passive crossover network operating at 1.7kHz with dynamic HF protection.
Performance of the loudspeaker, without any electronic control, shall meet or exceed the following criteria: Frequency range measured at 1 metre on axis
with swept sine wave shall be 62Hz to 45kHz. Sensitivity shall be at least 92dB (anechoic) for 2.83 Volts @ 1 metre and shall be capable of producing a
peak output level of 119dB (anechoic) on axis at 1 metre. The dispersion of the loudspeaker shall be 90 degrees conical (-6dB). The system shall have a
nominal impedance of 8 Ohms and maximum power handling shall be 260 Watts (programme).
The enclosure shall be an optimally tuned 17.0 litre vented cabinet of MDF construction. Connectors shall be 2 x 4mm binding posts. The enclosure shall be
fitted with 8 x integral M10 bracket inserts and 4 x keyhole fixings for portrait or landscape mounting using supplied wall plate.
T
he enclosure shall not exceed the following dimensions: 394 x 294 x 215mm (15.51 x 11.57 x 8.46”) (H x W x D).
T
he loudspeaker shall be the Tannoy… Definition Install DC8i.
Architectural specifications
Defintion_DC8i_Data_Sheet_DJ_amends:Layout 1 16/01/2008 11:12 Page 8