Filter
Top Products
Definition Install DC6i
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
Tannoyadoptsapolicyofcontinuousimprovementandproductspecificationissubjecttochange
DefinitionInstallDC6idatafile//issue1.06//15.01.08
T
he loudspeaker shall consist of a 150mm (6.00”) full range, point source Dual Concentric™ transducer. The low and high frequency elements shall be
c
ombined by an internal passive crossover network operating at 1.6kHz with dynamic HF protection.
Performance of the loudspeaker, without any electronic control, shall meet or exceed the following criteria: Frequency range measured at 1 metre on axis
with swept sine wave shall be 70Hz to 45kHz. Sensitivity shall be at least 90dB (anechoic) for 2.83 Volts @ 1 metre and shall be capable of producing a
peak output level of 116dB (anechoic) on axis at 1 metre. The dispersion of the loudspeaker shall be 90 degrees conical (-6dB). The system shall have a
nominal impedance of 8 Ohms and maximum power handling shall be 200 Watts (programme).
The enclosure shall be an optimally tuned 11.9 litre vented cabinet of MDF construction. Connectors shall be 2 x 4mm binding posts. The enclosure shall be
fitted with 8 x integral M10 bracket inserts and 4 x keyhole fixings for portrait or landscape mounting using supplied wall plate.
T
he enclosure shall not exceed the following dimensions: 334 x 250 x 214mm (13.15 x 9.84 x 8.45”) (H x W x D).
T
he loudspeaker shall be the Tannoy… Definition Install DC6i.
Architectural specifications
Defintion_DC6i_DJ_amends:Layout 1 16/01/2008 11:08 Page 8