Filter
Top Products
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
CVS 6
CVS6 data file // issue 1.06 // 15.01.08
TECHNICAL SPECIFICATIONS
F
requency Response (-3dB)
(
1)
7
9Hz - 21kHz
Frequency Range (-10dB)
(1)
60Hz - 24kHz
S
ystem Sensitivity (1W @1m)
(
2)
9
1dB (1W - 2.45V for 6Ω)
Nominal Coverage Angle 90 Degrees Conical
C
overage Angle (1kHz to 6kHz) 93 Degrees Conical
Directivity Factor (Q) 7.7 average 1kHz to 6kHz
D
irectivity Index (DI) 8.0 averaged 1kHz to 6Hz
Rated Maximum SPL 109dB (average)
1
15dB (peak)
Power Handling
Average 60W
Programme 120W
Peak 240W
Recommended Amplifier Power 120@ 6Ω
Nominal Impedance 6Ω
Transformer Taps
(via front rotary switch)
70V 60W / 30W / 15W / 7.5W / OFF
& Low Impedance operation
100V 60W / 30W / 15W / OFF
& Low Impedance operation
Distortion
10% Full Power 2nd Harmonic 3rd Harmonic
250Hz 0.439% 0.140%
1kHz 0.396% 0.458%
10kHz 0.235% 0.023%
1% Full Power 2nd Harmonic 3rd Harmonic
250Hz 1.16% 0.214%
1kHz 1.014% 0.685%
10kHz 0.944% 0.047%
Crossover 2.5kHz
Notes
(1)Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
Afull range of measurements, performance data, and Ease™ Data can be
downloaded from www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
Low Frequency 150mm (6.00”) mineral loaded cone
H
igh Frequency 19mm (0.75) softdome
Physical
S
ystem Type Ceiling speaker with integral
(Blind Mount) Back Can
E
nclosure
Backcan Zinc plated steel
Baffle Reflex loaded UL 94V-0 ratedABS
G
rille Steel, with weather resistant coating
S
afety Features Safety ring located at rear of enclosure
for load bearing safety bond
Clamping Design Security Toggle Clamp
Backcan Options
Blind Mount (BM) Yes
Pre Install (PI) NA
Cable Entry Options Cable clamp & squeeze connector for
conduit up to 22mm
Connectors Removable locking connector with screw
terminals with "loop through" facility
Safety Agency Rating
(pending)
U, CEL-1480, Ul-2043
BM Hole Cutout Diameter 250mm (9.84”)
Dimentions
Bezel Diameter
279.5mm (11.01”)
Front of ceiling to
rear of backcan 246.5mm (9.70”)
Front of Ceiling to
top of safety loop 258.5mm (10.18”)
Included Accessories C Ring, tile bridge, paint mask,
cutout template, grille
Optional Accessories Plaster (Mud) Ring
System CVS6
Transducers
8001 4240 CVS6 White / paintable 2 15.00 (33.07)
8001 4180 CVS6 Plaster (Mud) Rin Zinc plated steel 10 6.00 (13.23)
8001 3830 CMVS6 PI back can Zinc plated steel 1 3.10 (6.83)
PART NUMBER PACKED WEIGHTPACKED QUANTITYCOLOURMODEL NAME
Ordering Information