Tannoy CMS601 DC Portable Speaker User Manual


 
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
CMS601 DC
Tannoyadoptsapolicyofcontinuousimprovementandproductspecificationissubjecttochange
CMS601DCdatafile//issue1.06//10.01.08
TECHNICAL SPECIFICATIONS
F
requency Response (-3dB)
(
1)
7
5Hz - 30kHz
B
M Back can
Frequency Range (-10dB)
(1)
50Hz - 30kHz
B
M Back can
Frequency Range (-10dB)
(1)
46Hz - 30kHz
P
I Back can
System Sensitivity (1W @1m)
(2)
91dB (1W = 2.83V for 8 Ohms)
N
ominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 111 degrees conical
Directivity Factor (Q) 4.7 averaged 1kHz to 6kHz
Directivity Index (DI) 6.5 averaged 1kHz to 6kHz
Rated Maximum SPL
(2)
Average 110dB
Peak 116dB
P
ower Handling
Average 80W
P
rogramme 160W
Peak 320W
Recommended Amplifier Power 160W @ 8 Ohms
Nominal Impedance 8 Ohms
Transformer Taps (via front rotary switch)
70V 60W /30W/ 15W /7.5W /OFF &
low impedance operation
100V 60W/ 30W /15W /OFF&
low impedance operation
Distortion
10% Full Power 2nd Harmonic 3rd Harmonic
250Hz 1% 0.32%
1kHz 0.18% 0.32%
10kHz 1% 0.18%
1% Full Power 2nd Harmonic 3rd Harmonic
250Hz 0.25% 0.25%
1kHz 0.06% 0.18%
10kHz 0.45% 0.14%
Crossover
2kHz - 2nd order LF, 3rd order HF
(with dynamic HF protection)
(1)Averageover statedbandwidth. Measuredat 1metre onaxis.
(2) Unweightedpinknoise input,measured at1 metre in ananechoic chamber
(3) Long termpower handlingcapacity asdefined inEIA-426B test
Afullrange ofmeasurements, performancedata, CLF and Ease™Data canbe
downloaded fromwww.tannoy.com
Full independent verificationof publishedspecifications carried out byNWAALabs,
California canalsobe obtainedfrom thedownloads section ofwww.tannoy.com
Tannoyoperates apolicy ofcontinuous research anddevelopment. Theintroduction
of new materialsor manufacturingmethods will always equalor exceedthe
published specifications, whichTannoyreserves theright toalter without prior
notice. Pleaseverifythe latestspecifications whendealing withcritical applications.
System CMS601 DC
Transducers
8001 4530 CMS601 DC BM White / paintable 2
8001 4540 CMS601 DC PI White / paintable 2
8001 4181 CMS601 DC Plaster (Mud) Ring Zinc plated steel 10
8001 4590 CMS601 DC PI 8ohm back can Zinc plated steel 1
7600 1658 CMS601 DC 60W transformer kit 8ohm N/A 1
PART NUMBER PACKED QUANTITYBAFFLE / GRILLE COLOURMODEL NAME
Ordering Information
L
ow Frequency 1 x 165mm (6.50") Dual Concentric™
c
onstant directivity point source driver with
multi fibre paper pulp cone
H
igh Frequency 1 x 25mm (1.00") titanium dome with
n
eodymium magnet system
Physical
E
nclosure
Back can Zincplated steel
Baffle Reflex loaded UL 94V-0 rated ABS
Grille Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure
for load bearing safety bond
C
lamping Design Security toggle clamp
Min / Max Clamping Range 0.0mm (0.0") / 20.0mm (0.79")
Recommended Clamp Torque 1.5Nm
Back Can Options
Blind Mount (BM) Complete with fixed back can
P
re Install (PI) Separate back can for pre installation
Cable Entry Options Cable clamp and squeeze connector for
conduit up to 22mm
Conduit Knockouts 3 Sets of horizontal positions
19 / 22 / 28mm (0.75" / 0.87" / 1.10")
Connectors Removable locking connector with screw
terminals with "loop through" facility
Safety Agency Ratings
(pending) UL-1480, UL-2043, CE
BM Hole Cutout Diameter 253mm (9.96")
PI Hole Cutout Diameter 253mm (9.96")
Dimensions
Bezel diameter 280mm (11.02")
Front of ceiling to
rear of back can (BM) 258mm (10.16")
Front of ceiling to
top of safety loop (BM) 275.5mm (10.84")
Front of ceiling surface to
rear of speaker unit (PI) 99.40mm (3.91")
Front of accessory back can
bezel to top of safety loop (PI) 168.50mm (6.60")
Net Weight (ea)
CMS601 DC BM 7.45kg (16.42lbs)
CMS601 DC PI 4.09kg (9.02lbs)
CMS601 DC PI back can 3.685kg (8.12lbs)
Included Accessories C Ring, tile bridge, paint mask,
cutout template, grille
Optional Accessories Plaster (Mud) Ring