Filter
Top Products
SAT
The Kind of Bookshelf Speaker Everyone Else Is Trying To Build
When it comes to bookshelf speakers, there’s no shortage of products all claiming to be the best in their class. But, the new HRS
Satellites aren’t about best in class— because they’re in a class all by themselves.
Take their fully sealed enclosures featuring Sunre’s legendary High Back-emf woofer, the same one found in our most expensive and
high performance models. Sealed enclosures mean tighter, punchier bass you’ll hear every time you turn them on. In fact, more bass
than you’ll nd in any existing 4.5” two-way speaker.
HRS Sats also feature 4.5” Kevlar
®
drivers with a one-of-a-kind “Trilar” voice coil. This ultra lightweight, three-layer design delivers
up to an 80% increase in output when compared to conventionally wound designs. The result: a woofer that will play very loud; much
louder, in fact, than of those other so called ‘best-in-class’ competitors. Add to all this a patented, ring radiating silk dome tweeter that’s
similar to the one found in European speakers costing up to $12,000 a pair. With a ‘vented’ back chamber, this tweeter contributes to
the speaker’s extremely high power handling and produces greatly improved frequency response with very low distortion.
The HRS Sat center channel model has all the same benets as the Satellites discussed above while also featuring two 4.5” Kevlar
drivers and a purpose-designed “kick stand” that allows for custom tilting of the speaker to make a perfect audio match with any video
source you are using.
series
High Output Tweeter Audiophile Accuracy Center Channel Tilt Adjustment Long Throw Woofer
The HRS Sat center channel model has all the same benets as the Satellites discussed above while also featuring two 4.5” Kevlar
drivers and a purpose-designed “kick stand” that allows for custom tilting of the speaker to make a perfect audio match with any video
source you are using.
Use the optional
HRS oor stand to
properly place the
speaker at the correct
height for maximum
performance, while
hiding the speaker
wire from view.
HRS-SAT4 Specications
Model
HRS-SAT4
Design
2-way high pressure
Drivers
HF: 1” ring radiator tweeter
WF: 4.5” High Back-emf
Frequency Response
85Hz – 30kHz
Max Power Handling
200W
Minimum Power
25W
Maximum Output:
111dB
Crossover Frequency
1.5kHz
Sensitivity
88dB (2.83V / 1m)
Impedance
6 ohms (nominal)
Connections
1 pair gold plated binding posts
Finish
Black or white, piano-like nish
Weight
7 lbs / 3.2 kg
Dimensions
8” x 5.45” x 6” / 203.2mm x 138.4mm x 152.4 (HWD)
HRS-SAT-4C Specications
Model
HRS-SAT-4C
Design
2-way high pressure
Drivers
HF: 1” ring radiator tweeter
WF: Dual 4.5” High Back-emf
Frequency Response
85Hz – 30kHz
Max Power Handling
200W
Minimum Power
25W
Maximum Output:
111dB
Crossover Frequency
1.5kHz
Sensitivity
88dB (2.83V / 1m)
Impedance
6 ohms (nominal)
Connections
1 pair gold plated binding posts
Finish
Black or white, piano-like nish
Weight
12 lbs / 5.4 kg
Dimensions
5.45” x 13.2 x 6” / 138.4mm x 335.3 x 152.4 (HWD)