Filter
Top Products
3
Installation
Hardware Installation
Connect the included breakout cable to the card prior to installing the card.
This will prevent accidental disconnection of the card from trying to connect
the breakout cable after the card is installed.
NOTE: The connector on the EC1S1P55254 card will function as a standard
DB25 parallel port without the breakout cable. Connect the breakout cable if
the serial port is also required.
The ExpressCard adapter will simply slide into the ExpressCard slot on any
compatible system. Push the card all the way in, until it ‘clicks’ and locks into
place. To eject the card, simply push the card further into the slot until it clicks,
and then release and it will then be automatically ejected from the slot.
Turning the computer off to insert/remove ExpressCard adapters is not
necessary as they are hot-pluggable.
Driver Installation
Windows 2000/XP/Server 2003
1. When the Found New Hardware wizard appears on the screen, insert
the Driver CD into your CD/DVD drive. If you are prompted to connect to
Windows Update, please select the “No, not this time” option and click Next.
2. Select the option “Install Drivers Automatically (Recommended)” and then
click the Next button.
3. Windows should now start searching for the drivers. Once this has
completed, click the Finish button.
Windows Vista/7
1. When the Found New Hardware window appears on the screen, click on
the “Locate and install drivers software (recommended)” option. If prompted
to search online, select the “Don’t search online” option.
2. When prompted to insert the disc, insert the Driver CD that came with the
card, into your CD/DVD drive and Windows will automatically proceed to
search the CD.
3. If a Windows Security dialog window appears, click the “Install this driver
software anyway” option to proceed.
4. Once the driver is installed, click the Close button.