Filter
Top Products
12. If the REPEAT ONE function is selected during playback, the selected track will be played automatically
and repeats continuously.
13. To repeat the entire CD, press the PLAY MODE Button twice
,
,
in STOP mode. The REPEAT
INDICATOR lights steadily in the Display.
14. Press the Button to start playback from Track 1. The entire CD will be repeated continuously until
the STOP ■ Button is pressed.
15. If the REPEAT ALL function is selected during playback, the entire CD will be played automatically and
repeats continuously.
16. To cancel repeat playback, press the PLAY MODE repeatedly until the REPEAT INDICATOR goes off.
17. To stop playing, press the STOP ■ Button once.
RANDOM PLAYBACK
This function allows all the tracks on a disc to be played in a random sequence.
1. Load your disc and wait until the total track number is displayed.
2. Press the PLAY MODE Button three times
in STOP mode. The RANDOM Indicator comes “On”.
3. Press the Button. A track will be selected and playback begins.
The Display will show the track number of the selected track momentarily and return to current time.
4. If the Random function is selected during playback, press
Button to start random playback.
Note: The Player will stop automatically after all the tracks on the disc have been played.
5. To cancel random playback, simply press the PLAY MODE Button again. RAMDOM Indicator goes
“Off”.
6. When you wish to turn off the CD Player, press the POWER Button again.
CD PROGRAMMED PLAY
This function allows the tracks to be played in a programmed sequence. You may program a track or
tracks to play more than once if desired.
Note: i. Programming can only be done while the player is in the Stop mode. If a disc is playing press the
STOP Button to stop playback before performing the programming steps below.
ii. Programmed play will be disabled if Random function is activated.
1. Turn the unit “On”, select CD function and load the disc in the player. Wait until the total track number is
displayed.
2. Press the PROG (PROGRAM) Button. The PROG (PROGRAM) Indicator flashes and the Display
briefly shows “P 01” then “00” appears and flashes indicating that you can select the first track to be
programmed.
8