Filter
Top Products
5
1
/
4
” 6-32 machine
screw
Flush mount
cup
Mounting
surface
FIGURE 2
FIGURE 1
Spring
clip
Surface Mounting:
1) Drill one 5/16" diameter hole for the tweeter lead wires and two pilot
holes for the mounting screws.
2) Attach the surface mount plate with two flat head screws.
3) Pass the lead wires through the hole. See figure 3.
4) Engage the locking holes on the back of the tweeter onto the tabs on
the plate and rotate counter-clockwise until locked. See figure 4.
FIGURE 3
FIGURE 4
Turn Counter-Clockwise to Lock
Turn Clockwise to Lock
60.pub
page 5
Friday, September 10, 1999 21:03