Filter
Top Products
FM
MHz
1
FM
MHz
2
FM
MHz
3
KHz
AM
Listening to the radio
1 Press RADIO ON/OFF.
2 Press BAND to select the band (FM1, FM2,
FM3 or AM).
Each time you press the button, the display
changes.
3 Press TUNING –/+ to tune the station you
want.
To turn off the radio
Press RADIO ON/OFF.
To tune the station quickly
Hold down TUNING –/+ in step 3. The frequency
digits change quickly. When you release the button,
the frequency digits change slowly. When the
desired frequency digits appear, press TUNING –/+
again.
0
pSTOP
VOLUME
(
AVLS
2
NORM/CrO
2
/METAL•
DX/LOCAL
TUNING –/+
(PLAY
RADIO ON/OFF
DC IN 3V
BAND
1-5 (preset)
)
Playing a tape
1 Set NORM•CrO2/METAL to match the
tape type.
2 Insert a cassette and press (PLAY.
To Press
Stop playback p
Fast-forward ) or 0 (For the side facing
or rewind the tape forward)
To improve broadcast reception
For FM, extend the headphones/earphones cord or
adjust the DX/LOCAL.
For AM, reorient the unit itself.
Note
If the broadcast becomes noisy when a cassette with a
metallic shell or label is inserted, remove the cassette.
To listen to the radio abroad
The frequency range differs depending on the area.
If you listen to the radio in an area of different
frequency range, change the area indication in the
display.
1 Press BAND for about 10 seconds while the radio
is turned on.
2 Press TUNING – or + to change the area
indication.
("U": U.S.A., Canada and Central and South
America, "E": European and other countries).
3 Press BAND to set the frequency range.
Notes
•If you change the frequency range, all the preset
stations will be canceled.
•When you want to cancel during a change of the area
indication.
Press BAND after pressing TUNING – or +, all the
preset stations will be canceled.
Location of parts and controls
To limit the maximum volume
automatically
Set AVLS (Automatic Volume Limiter System) to
LIMIT. The maximum volume is kept down to
protect your ears, even if you turn the volume up.
To cancel the AVLS function, set AVLS to NORM.
Note
•Do not open the cassette holder while the tape is
running.
To preset radio stations
You can store radio stations into the unit’s memory.
You can preset up to 20 radio stations, 5 for each
FM1, FM2, FM3 or AM bands.
1 Press RADIO ON/OFF.
2 Tune in the desired station by using the
BAND and TUNING – or +.
3 Press a preset number (1-5) for 2 seconds,
the displayed frequency will flash with a
beep sound and the station is stored.
If a station is already stored, the new station
replaces the old one.
To play the preset radio stations
Press BAND to select the band, and then press the
corresponding preset button.
AM
FM
NORM CrO
2
/METAL
PLAY
RADIO
ON/OFF
BAND
LOCALDX
5
1
2
3
4
RADIO
ON/OFF
FM
MHz
1
FM
MHz
1
TUNING
+
–