Sony TRV408E MP3 Docking Station User Manual


 
156
Others
Symptom Cause and/or Corrective Actions
Your VCR and/or video camera recorder is not set correctly.
c Make sure the input selector of the VCR is set to LINE. Also,
make sure the power switch of the video camera is set to
VTR/VCR (p. 103).
The IR SETUP code or PAUSE MODE is not set correctly.
c Select the correct IR SETUP code and PAUSE MODE,
according to your VCR. Then confirm VCR operation with
the IR TEST function. (p. 103, 104)
The input selector on the VCR is not set correctly.
c Set the selector correctly, and check the connection between
the VCR and your camcorder. (p. 111)
The camcorder is connected to DV equipment other than of
Sony using the i.LINK cable (DV connecting cable).
c Keep the connection, and follow the procedure on page 117.
Setting programme on a blank portion of the tape is attempted.
c Set the programme again on a recorded portion (p. 120).
The synchronisation of your camcorder and the VCR is not
adjusted.
c Adjust the synchronisation of the VCR (p. 118).
Your camcorder was connected to your computer with the USB
cable before installing the USB driver, so the driver was not
recognised by the computer.
c Uninstall the unrecognised driver, and then reinstall the
driver. (p. 127)
The USB driver is not installed correctly.
cUninstall the unrecognised driver, and then reinstall the
driver. (p. 127)
Your computers operating system is Windows 98 or earlier.
The USB cable was not connected before starting up the
application software.
c Connect the USB cable before starting up the application
software. (p. 130)
COMMANDER is set to OFF in the menu settings.
c Set it to ON. (p. 143)
Something is blocking the infrared rays.
c Remove the obstacle.
The batteries are inserted in the battery holder with the
+ polarities incorrectly matching the + marks.
c Insert the batteries with the correct polarity. (p. 198)
The batteries are dead.
c Insert new ones. (p. 198)
*
1)
CCD-TRV107E/TRV108E/TRV208E/TRV408E only
*
2)
DCR-TRV140E only
*
3)
CCD-TRV107E/TRV208E/TRV408E, DCR-TRV140E only
Types of trouble and their solutions
The Remote Commander supplied
with your camcorder does not
work.*
3)
Digital program editing does not
function.*
2)
You cannot install the USB driver.*
2)
Easy Dubbing does not function.*
1)
USB Streaming function does not
work.*
2)