Sony TRV208E MP3 Docking Station User Manual


 
154
In the playback mode
Symptom Cause and/or Corrective Actions
The tape is recorded in the Hi8 /Standard 8 mm
(analogue) system.
The POWER switch is set to CAMERA or OFF (CHG).
c Set it to PLAYER. (p. 43)
The tape has run out.
c Rewind the tape. (p. 43)
The televisions video programme position is not adjusted
correctly.
c Adjust it. (p. 50)
EDIT is set to ON in the menu settings.
c Set it to OFF. (p. 138)
This video head may be dirty.
c Clean the heads using the Sony V8-25CLD cleaning cassette
(optional). (p. 181)
The video head may be dirty.
c Clean the heads using the Sony V8-25CLD cleaning cassette
(optional). (p. 181)
The stereo tape is played back with HiFi SOUND set to 2 in the
menu settings.*
1)
c Set it to STEREO. (p. 138)
The volume is turned to minimum.
c Open the LCD panel and press VOLUME +. (p. 43)
AUDIO MIX is set to ST2 side in the menu settings.*
1)
c Adjust AUDIO MIX. (p. 138)
The tape has a blank portion in the recorded portion. (p. 94)
AUDIO MIX is set to ST1 side in the menu settings.
c Adjust AUDIO MIX. (p. 138)
*
1)
DCR-TRV140E only
*
2)
CCD-TRV107E/TRV108E/TRV208E/TRV408E only
The tape does not move when a
video control button is pressed.
No sound or only a low sound is
heard when playing back a tape.
The playback picture is not clear or
does not appear.*
2)
The playback button does not work.
The picture does not appear on the
screen when playing back a tape.*
1)
There are horizontal lines on the
picture or the playback picture is
not clear or does not appear.*
1)
Types of trouble and their solutions
The new sound added to the
recorded tape is not heard.*
1)
The date search does not work
correctly.*
1)