Filter
Top Products
7
GB
Connect and position the TDM-iP1 as illustrated below.
To connect to an AV system which cannot output video signals
when the system is in DMPORT function
Connect the supplied composite video cable to the VIDEO OUT jack of
this unit.
Refer to the user’s guide of your AV system for further information.
Notes
• This unit turns on/off automatically whenever the connected AV system (DAV
series, etc.) turns on/off.
• When connecting a video cable to a TV that has a SCART (EURO AV) jack, use a
commercially available conversion connector.
• When connecting the composite video cable to the VIDEO OUT jack of the unit,
no image is output from the DIGITAL MEDIA PORT cable of the unit.
3: Installing the TDM-iP1
DMPORT
Video cable
(not supplied)
DIGITAL MEDIA
PORT cable
TV AV system (Sony DAV
series, STR series, etc.)
TDM-iP1
Composite video cable (supplied)
DIGITAL MEDIA
PORT cable
AV system
(Sony HT series, etc.)
TV TDM-iP1
continued