Filter
Top Products
NW-A1000/A3000.GB.2-657-722-11(1)
16
17
NW-A1000/A3000.GB.2-657-722-11(1)
USB cable
(supplied)
1
Double-click “CONNECT Player” on the desktop.
The CONNECT Player program starts.
2
Connect the player to your computer with the supplied USB cable.
When the player is connected to CONNECT Player for the first time, the transfer
mode selection window appears. Select an appropriate transfer mode, and then click
“OK.”
The “Do not disconnect” message on the player’s display disappears when the
transfer of the tracks finishes. Do not disconnect the USB cable from the player until
the message disappears.
Notes
• Before transferring tracks or using the player for the first time, fully charge the battery.
• Do not disconnect the USB cable while data is being transferred.
• If the computer enters a power saving mode such as the system suspend, sleep, or hibernation
while the player is connected with the USB cable, the player’s battery will begin discharging.
• Do not leave the player connected for extended periods to a laptop computer that is not
connected to AC power, because the player may discharge the computer’s battery.
Hints
• CONNECT Player also offers the following additional features. For details, refer to
CONNECT Player Help.
– Transferring only selected audio files
– Creating and transferring playlists that group your favorite tracks into a list
• While the player is connected to the computer via the USB cable, the player’s battery is
charged, and the lamp on the USB cable lights up. When charging finishes, the lamp turns off.
Transferring Music
Transfer audio tracks from CONNECT Player to the player.
How to remove the USB cable
press and hold the buttons on both
sides, and then pull the USB cable
outward.
Do not force the cable from the player.
Doing so may damage the player.