Filter
Top Products
57
Operating Instructions
On the remote control
1 Press DISPLAY for 2 seconds or longer
while playing the track you want to
move.
” : Name” flashes in the display
and the recorder plays the selected
track repeatedly.
2 Turn the control until ” : Move”
appears in the display.
3 Press p.
4 Turn the control to select the
destination track number.
5 Press p again.
The selected track moves just before
the destination track.
Labeling recordings
See the illustration in the Japanese text
(page 27).
You can name tracks during playback,
discs during stop, and both during
recording. Each name can be as long as 200
letters.
Each disc can hold up to 1700
alphanumeric letters or 800 katakana
characters during playback or stop, and
500 alphanumeric letters or 200 katakana
characters during one recording.
Labeling on the recorder
Labeling a disc during stop
1 Insert a disc.
To label a disc that is already in the
recorder, press p to stop.
2 Press EDIT/ENTER.
” : Name” flashes in the display.
3 Press EDIT/ENTER again.
4 Press = or + repeatedly to select
a letter and press ( to enter.
The selected letter stops flashing and
the cursor moves to the next input
position.
Press p to switch between katakana,
the alphabet, and symbols/numbers.
Press VOLUME +/– to move the
cursor to left or right.
Erasing a track mark
See the illustrations in the Japanese text
(page 25).
When you record with analog (line) input,
unnecessary track marks may be recorded.
You can erase a track mark to combine the
tracks before and after the track mark.
1 While playing the track with the track
mark you want to erase, press P to
pause.
2 Find the track mark by pressing =
slightly.
"00:00" flashes in the display.
3 Press the T MARK to erase the mark.
”MARK OFF” appears in the display.
The track mark is erased and the two
tracks are combined. The number of
the newly combined track will be that
of the first track and the succeeding
tracks will be renumbered.
Moving recorded tracks
See the illustrations in the Japanese text
(page 26).
You can change the order of the recorded
tracks.
On the recorder
1 Press EDIT/ENTER while playing the
track you want to move.
” : Name” flashes in the display
and the recorder plays the selected
track repeatedly.
2 Press = or + repeatedly until
”Move” flashes in the display.
3 Press EDIT/ENTER again.
4 Press = or + repeatedly to select
the destination track number.
To cancel moving, press p or T
MARK.
5 Press EDIT/ENTER again.
The track moves to the selected
destination track.
continued