Sony ICD-ST10 MP3 Player User Manual


 
50
GB
Using an Adding Recording
At a factory setting, you cannot add a recording (page 33) not to erase the
message by accidental operation. If you want to add a recording to a
previously recorded message (page 33) or
add an overwrite recording
(page 34)
, change the REC-OP setting in the procedures below.
1 Turn the jog lever toward MENU.
The menu mode will be displayed in the display
window.
2 Press the jog lever up or down (>/.)
to select REC-OP, then press the jog lever
(xB).
The adding recording window will be displayed.
3 Press the jog lever up or down (>/.)
to select ON, then press the jog lever
(xB).
The setting is changed.
4 Press the jog lever up or down (>/.)
to select ADD or OVER, then press the
jog lever (xB).
ADD: adds a recording to a
previously recorded message
OVER:
adds an overwrite recording
5 Press the jog lever toward MENU to exit
the menu mode.
The normal display appears.
To prohibit to add a recording
In step 3 , select OFF and then press the jog lever (xB).
Jog lever (>/./xB/
MENU)