Sony CFD-S40CP MP3 Player User Manual


 
30
Notes
The file names and folder names must be ISO
9660 level 1 compliant.
When naming, be sure to add the file extension
mp3 to the file name.
If you put the extension mp3 to a file other
than MP3, the player cannot recognize the file
properly and will generate random noise that
could damage your speakers.
The file name does not correspond to the ID tag.
THE USABLE NUMBER OF
FOLDERS/FILES
Maximum folder number: 255
Maximum file number: 255
SETTINGS FOR COMPRESSION
SOFTWARE AND WRITING
SOFTWARE
To compress a source for an MP3 file, we
recommend setting the transfer bit rate of
the compression software to 44.1 kHz,
128kbps, and Constant Bit Rate.
To record up to the maximum capacity, set
to the halting of writing.
To record at one time up to the maximum
capacity on media that has nothing
recorded it, set to Disc at Once.
NOTES FOR SAVING FILES ON
THE MEDIA
When the disc is inserted, the player reads
all the files on that disc. If there are many
folders or non-MP3 files on the disc, it may
take a long time for play to begin or for the
next MP3 file to start play.
Do not save unnecessary folders or files
other than MP3 ones in the disc to be used
for MP3 listening.
We recommend that you do not save other
types files or unnecessary folders on a disc
that has MP3 files.
About “MP3”
What is the MP3?
MP3 (MPEG 1 Audio Layer-3) is a standard
technology and format for compressing a
sound sequence. The file is compressed to
about 1/10 of its original size. Sounds
outside the range of human hearing are
compressed while the sounds we can hear
are not compressed.
Playable “MP3” files on this
player
You can only play MP3 files recorded by
following requirements.
USABLE MEDIA
CD-Rs and CD-RWs
USABLE DISC FORMAT
You can use ISO 9660 Level 1 format discs,
not including the expanded format. In
some cases, MP3 files that are recorded in a
format other than ISO 9660 Level 1 may not
play normally or the file and folder names
may not be displayed correctly.
The major specifications of the ISO 9660
Level 1 format are as follows:
Maximum directory steps: 8
Usable characters for a file/folder name:
A - Z, 0 - 9, _ (underscore)
Maximum number of characters for a file
name: 12 including quotation marks and a
3-character extension code