Filter
Top Products
20
GB
1 Connecting the mains lead
Insert one end of the supplied mains
lead to the AC IN socket located at the
rear of the player, and the other end to
the mains.
Brazilian model only: Adjusting
the voltage
Be sure to set the VOLTAGE SELECTOR
(at the bottom) to your local power supply.
Tip
Only for the customers supplied with an AC plug
adaptor:
Use the supplied AC plug adaptor if the plug of
the main lead does not match your outlet.
Setting Up
Choosing the power sources
You can use the AC power or batteries as a power source.
AC IN
3 Battery compartment
1 to the mains
Changing the AM/MW tuning
interval
The AM/MW tuning interval is preset as
follows at the factory:
Argentine and Brazilian models: 10 kHz
Other models: 9 kHz
If you need to change the AM/MW tuning
interval, do the following:
1 Disconnect the mains lead from the mains
and remove all the batteries.
2 Press OPERATE (or POWER) until all the
indications in the display disappear.
3 While keeping the RADIO BAND•AUTO
PRESET and x pressed, reconnect the
mains lead to the mains. The tuning
interval is changed and “AM9” “MW9” or
“AM10” “MW10” appears in the display
for 2 seconds.
After changing the tuning interval, you need
to reset your preset AM/MW radio stations.