Filter
Top Products
The Timer 21
EN
The Timer
Setting the clock
Before you set the clock, connect the AC
power adaptor (see page 25.)
Before you set the clock, “0:00” flashes.
The Timer
1 Press CLOCK for about 2 seconds until the hour
digit flashes.
2 Press TUNING/TIME SET +/– until you set the
current hour. Then press DISPLAY/ENTER•
MEMORY.
The minute digits flash. Set the minutes by
pressing TUNING/TIME SET +/– until the correct
minute is displayed.
3 Press DISPLAY/ENTER•MEMORY.
The clock starts from 00 seconds.
Tip
The time display
system:
24-hour system
CLOCK DISPLAY/ENTER
MEMORY
/
TUNING/TIME
SET +/–