Filter
Top Products
NWZ-S715F / S716F / S718F GB.3-294-595-11(1)
6
NWZ-S715F / S716F / S718F GB.3-294-595-11(1)
7
Parts and Controls
e 5-way button performs dierent
functions, depending on the displayed
screens. For details, refer to the “Player
Controls and eir Screens” of the
Operation Guide (PDF le).
(play/pause/
conrm) button*
2
/ buttons
/ buttons
BACK/HOME button*
1
Press to go up one list screen level, or to
return to the previous menu. Press and hold
the BACK/HOME button to display the
Home menu (
page 9).
5-way button
Press the button to start playback.
Press the button to conrm aer
selecting an item with the /// button.
When using the up (), down (), le ()
or right () button with the 5-way button,
press on the /// icon.
Front
Display
e display may vary, depending on
functions. For details, refer to the Operation
Guide (PDF le).
VOL +*
2
/– button
Adjusts the volume.
OPTION/PWR OFF button*
1
Displays the Option menu. If you press and
hold the OPTION/PWR OFF button, the
screen turns o and the player enters the
standby mode. If the standby mode is
retained for about a day, the player turns o
completely automatically (
page 12).
*
1
Functions marked with on the
player are activated if you press and hold
the corresponding buttons.
*
2
ere are tactile dots. Use them to help
with button operations.
RESET button
Resets the player when you press the RESET
button with a small pin, etc.
WM-PORT jack
Use this jack to connect the supplied USB
cable, or optional peripheral devices, such
as supported accessories for the WM-PORT.
NOISE CANCELING switch
By sliding the NOISE CANCELING switch
in the direction of the arrow , the Noise
Canceling function is activated (
page 8).
Headphone jack
For connecting the headphones. Insert the
jack pin until it clicks into place. If the
headphones are not connected properly, the
sound from the headphones may not sound
right.
Strap hole
is is used to attach a strap (sold separately).
HOLD switch
You can protect the player against accidental
operation by using the HOLD switch when
carrying it. By sliding the HOLD switch in
the direction of the arrow , all operation
buttons are disabled. If you slide the HOLD
switch to the opposite position, the HOLD
function is released.
Rear
Continued