Filter
Top Products
1717
NW-A805/A806/A808/NWZ-A815/A816/A818
NW-A805/A806/A808/NWZ-A815/A816/A818
4-4-8. NAND capacity check
(since firmware version 1.00.20)
Capacity of NAND flash memory, present bud block, maximum
bud block, and vender ID are displayed.
Checking method:
1. Enter the test mode.
2. Press the
v / V key to select the “OTHER”, and press the B
key to enter the minor item.
3. Press the v / V key to select the “NCAPCHK”.
4. Press the u key, capacity of NAND flash memory, present
bud block, maximum bud block, and vender ID are displayed.
liquid crystal display
OTHER NCAPCHK
X @@@@ #### $$$$
X: Capacity of NAND flash memory
2/4/8 (2 GB/4 GB/ 8 GB)
@@@@ : Number of present bud block
(It makes an error the acquisition of the number
of bud blocks at “–1”)
#### : Number of maximum bud block
(It makes an error the acquisition of the vender ID
at “–1”)
$$$$ : Vender ID of NAND flash memory
0x98/0xec (TOSHIBA/SAMSUNG)
(It makes an error the acquisition of the vender ID
at “–1”)
5. Press the [BACK] key, return to minor item selection screen.
4-5. Shutdown
Function that power supply of set can be turned off without ending
static test mode.
Procedure:
1. Enter the test mode.
2. Press the v / V key to select the “SHUTDOWN”, and press
the B key to select the “SURE ?”.
3. Press the u key, turn the power off while having entered the
test mode.
4-4-2. Key check
The operation of the key is confirmed.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “OTHER”, and press the B
key to enter the minor item.
3. Press the v / V key to select the “KEY”.
4. Press the u key, all keys are displayed.
liquid crystal display
OTHER KEY
UP VOL+
REW PLAY FF VOL–
DOWN OPTION
HOLD BACK
START
5. The character corresponding to the key is selected every time
the key is pressed. “START” changes into “OK” if all keys are
pressed.
6. Slide the [HOLD] key from ON to OFF, return to minor item
selection screen.
4-4-3. Format
The user’s area is formatted, and ICV for the video and ICV for
audio are initialized.
Note: Not used for the servicing.
Format the set from “Settings” → “Common settings” →
“Format” when it home menu in usually operates when the
set should format it.
4-4-4. Destination setting
The destination setting, language information, and sound pressure
regulation information are written in the NAND flash memory.
Note: Not used for the servicing.
4-4-5. Sound pressure regulation setting
ON/OFF of sound pressure regulation is confirmed.
Note: Not used for the servicing.
4-4-6. Firmware version check
The firmware version is displayed.
Checking method:
1. Enter the test mode.
2. Press the
v / V key to select the “OTHER”, and press the B
key to enter the minor item.
3. Press the
v / V key to select the “FWVER”.
4. Press the
u key, the firmware version is displayed.
liquid crystal display
OTHER FWVER
X.XX.XX
X.XX.XX : Firmware version
5. Press the [BACK] key, return to minor item selection screen.
4-4-7. NAND capacity check
(firmware version 1.00.19 former)
Capacity of NAND flash memory is displayed.
Checking method:
1. Enter the test mode.
2. Press the v / V key to select the “OTHER”, and press the B
key to enter the minor item.
3. Press the v / V key to select the “NCAPCHK”.
4. Press the u key, capacity of NAND flash memory is dis-
played.
liquid crystal display
OTHER NCAPCHK
X GB
X GB : Capacity of NAND flash memory
2 GB/4 GB/8 GB
5. Press the [BACK] key, return to minor item selection screen.