Sony NWZ-A816 MP3 Player User Manual


 
6
NW-A805/A806/A808/NWZ-A815/A816/A818
SECTION 2
GENERAL
This section is extracted from
instruction manual.
Parts and Controls
1
5-way button*
1
Starts playback and enables
navigation of the player’s on-screen
menus.
2
BACK/HOME button*
2
Press to go up one list screen level,
or to return to the previous menu.
Press and hold the BACK/HOME
button to display the Home menu.
3
WM-PORT jack
Use this jack to connect the supplied
USB cable, or optional peripheral
devices, such as supported
accessories for the WM-PORT.
4
Headphone jack
For connecting the headphones or the
headphone extension cord. Insert the
jack pin until it clicks into place. If
the headphones are connected
improperly, the sound from the
headphones may not sound right.
Whenusing the headphone
extension cord
Headphone
extension cord
Headphones
Front
Rear
5
OPTION/PWR OFF button*
2
Displays the Option menu.
If you press and hold the OPTION/
PWR OFF button, the screen turns
off and the player enters the standby
mode. If you press any button while
the player is in the standby mode,
the Now Playing screen appears and
the player is ready for operation.
Furthermore, if you leave the player
in the standby mode for about a day,
the player turns completely off
automatically. If you press any button
when the player is turned off, the
start up screen appears first, then the
Now Playing screen appears.
Note
The player consumes the battery very
slightly even when it is in the standby
mode. Therefore, the player might
turn completely off in a short time,
depending on the power remaining in
the battery.
6
VOL+ *
1
/-- button
Adjusts the volume.
7
RESET button
Resets the player when you press the
RESET button with a small pin, etc.
8
Strap hole
This is used to attach a strap (sold
separately).
9
HOLD switch
You can protect the player against
accidental operation by using the
HOLD switch when carrying it. By
sliding the HOLD switch in the
direction of the arrow, all operation
buttons are disabled. If you slide the
HOLD switch to the opposite
position, the HOLD function is
released.
*
1
There are tactile dots. Use them to help
with button operations.
*
2
Functions of marked with on the
player are activated if you press and hold
the corresponding buttons.