Filter
Top Products
40
To delete abnormal data from the built-in flash memory
If “CANNOT PLAY,” “EXPIRED,” “FILE ERROR,” or “MG ERROR” is displayed, there is a
problem with all or part of the data stored in the built-in flash memory.
Please follow the procedures below to erase data you cannot play.
1 Connect your Network Walkman to the computer, and start the SonicStage software.
2 If you have already specified the data with problems (such as expired songs), erase the data
from the Portable Player window of the SonicStage software.
3 If the problem persists, transfer all data without problems back to the computer using the
SonicStage software while your Network Walkman is connected to the computer.
4 Disconnect your Network Walkman from the computer and then format the built-in flash
memory using the FORMAT menu (page 34).
Message
MG ERROR
NO DATA
Meaning
An unauthorized distribution file is
detected for copyright protection.
There is no audio files in the built-
in flash memory.
Remedy
Transfer the normal audio file back to the
computer and then format your Network
Walkman. For details, refer to “To delete
abnormal data from the built-in flash
memory” on page 40.
If there is no audio files in the built-in
flash memory, use the SonicStage
software to transfer audio files.
Troubleshooting