Sony NW-MS9 MP3 Player User Manual


 
21
Advanced Operations
5 Press (PUSH) of the Seesaw key.
“FORMAT?” appears.
6 Press (PUSH) of the Seesaw key.
“FORMATING” blinks, and starts
formatting of the “Memory Stick.”
When formatting is finished,
“COMPLETE” appears in the display,
and returns to the menu in step 2.
7 Press the MENU button.
The display returns to normal.
To exit from the Menu mode
Select [RETURN] in the menu or press the MENU
button.
To cancel the formatting
Select “N” in step 3, or press the Seesaw key to
select b or B in step 5.
Notes
• You cannot format while playback (“FORMAT”
will not be displayed).
• If the erasure prevention switch of the “Memory
Stick” is ON, “MS LOCKED” appears in the
display, and you cannot format the “Memory
Stick.”
• Do not take out the “Memory Stick” when
“FORMATING” is displayed.
Tip
If the songs are formatted from the “Memory Stick,”
OpenMG Jukebox recognizes them as songs to be
checked in when the “Memory Stick” is connected
to the original computer that you used for Check-
out.
Therefore, the remaining Check-out count increases
automatically.
To format the
“Memory Stick”
(FORMAT)
You can use the Network Walkman player to
format the “Memory Stick”.
If formatted, all data previously recorded on
the “Memory Stick” will be erased. Be sure to
check the data of the “Memory Stick” before
formatting (data recorded using other devices
will also be erased).
A commercially available “Memory Stick” is
already formatted at the factory.
The supplied “Memory Stick” is also
formatted.
Note
You cannot use a “Memory Stick” that has been
formatted using the computer (page 6).
1 Press the MENU button.
The menu is displayed.
2 Press b or B of the Seesaw key to
display “FORMAT.”
If “FORMAT” does not appear in the
menu, formatting is not available.
3 Press (PUSH) of the Seesaw key.
“N” blinks.
4 Press b or B of the Seesaw key to
display “Y.”
REP :OFF
FORMAT>
FORMAT : N
FORMAT : Y>