Filter
Top Products
18
It is preferable to use the recorder on house
current when recording or editing. When
powering the recorder with a battery, make sure
to use a new alkaline dry battery.
When to replace the dry
battery
You can check the battery condition on the
display window of the recorder or the remote
control.
Battery power decreasing
m
Weak battery
m
The battery is drained.
“LOW BATTERY” flashes in the
display on the recorder (“LOW
BATT” on the remote control), and
the power goes off.
The battery level indicator is approximate. It
may be more or less than the indication
depending on the operating condition or the
operating environment.
Hi-MD mode (When using a 60/74/80-
minute standard disc)
(Unit: approx.hours)(JEITA)
MD mode
(Unit: approx.hours)(JEITA)
When using the radio
(Unit: approx.hours)(JEITA)
•Stop the recorder before replacing the battery.
•When using a 1GB Hi-MD disc, the
continuous recording time may be shortened if
you repeatedly make short recordings.
•When you use the radio, it is recommended
that you use a new alkaline dry battery since
more power is consumed by the radio than by
MiniDisc playback.
Note
Battery life
1)
Hi-MD mode (When using a 1GB Hi-
MD disc)
(Unit: approx.hours)(JEITA
2)
)
1)
When using a Sony LR6 (size AA)
“STAMINA” alkaline dry battery (produced in
Japan)
2)
Measured in accordance with the JEITA
(Japan Electronics and Information
Technology Industries Association) standard.
When Linear
PCM
Hi-SP Hi-LP
Recording
continuously
2.5 3.5 4.5
Playing
continuously
11 18.5 21.5
When Linear
PCM
Hi-SP Hi-LP
Recording
continuously
589.5
Playing 9.5 17 20
When
SP
Stereo
LP2
Stereo
LP4
Stereo
Recording
continuously
7.5 9.5 11
Playing
continuously
20.5 24 26
When
FM/AM TV/Wb
(weather)
Using the
radio
18.5 17
Notes