Filter
Top Products
27
Error displays/Messages
*1 When an error occurs during playback of a MD or
CD, the disc number of the MD or CD does not
appear in the display.
*2 The disc number of the disc causing the error
appears in the display.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
* TOC = Table of Contents
A programme broadcast in stereo is heard
in monaural.
The unit is in monaural reception mode.
tCancel monaural reception mode (page
21).
RDS
The SEEK starts after a few seconds of
listening.
The station is non-TP or has weak signal.
tPress (AF) or (TA) repeatedly until “AF-
OFF” or “TA-OFF” appears.
No traffic announcements.
• Activate “TA. ”
• The station does not broadcast any traffic
announcements despite being TP.
tTune in another station.
PTY displays “- - - - - - - -.”
• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the programme
type.
Error displays
(For this unit and optional CD/MD changers)
The following indications will flash for about 5
seconds, and an alarm sound will be heard.
BLANK*
1
No tracks have been recorded on an MD.*
2
tPlay an MD with recorded tracks on it.
ERROR*
1
• A CD is dirty or inserted upside down.*
2
tClean or insert the CD correctly.
• A CD/MD cannot play because of some
problem.*
2
tInsert another CD/MD.
HI TEMP
The ambient temperature is more than 50°C.
tWait until the temperature goes down
below 50°C.
NO DISC
No disc is inserted in the CD/MD unit.
tInsert discs in the CD/MD unit.
NO MAG
The disc magazine is not inserted in the CD/
MD unit.
tInsert the magazine in the CD/MD unit.
NOTREADY
The lid of the MD unit is open or the MDs are
not inserted properly.
tClose the lid or insert the MDs properly.
RESET
The CD/MD unit cannot be operated because
of some problem.
tPress the RESET button on the unit.
Messages
L.SEEK +/–
The Local Seek mode is on during automatic
tuning (page 13).
NO AF
There is no alternative frequency for the
current station.
NOT READ
The unit is reading the TOC* information.
**
WAIT
**
The unit is reading the TOC* information.
“” or “”
You have reached the beginning or the end of
the disc and you cannot go any further.