Filter
Top Products
56
Messages
Follow the instructions below if an error message appears in the display.
Message
ACCESS
AVLS (blinks)
CANNOT PLAY
CHARGE ERROR
EXPIRED
FILE ERROR
FORMAT ERROR
HOLD
LOW BATTERY
MEMORY ERROR
Meaning
Accessing the built-in flash
memory.
The volume level exceeds the rated
value while the AVLS is enabled.
• Your Network Walkman cannot
play certain files because of
incompatible formats.
• Transferring has been interrupted
forcefully.
The power supply is abnormal.
The track is playback restricted by
the copyright holder.
• The file cannot be read.
• The file is not normal.
The built-in flash memory was
formatted on a computer.
Your Network Walkman cannot be
operated because the Slide Cover is
set to the “HOLD” position.
The battery is low.
A malfunction is detected in the
built-in flash memory.
Remedy
Please wait for access to complete. This
message appears while the built-in flash
memory is initiating.
Turn the volume down or disable the
AVLS (page 33).
If the file cannot be played, you can erase
it from the built-in flash memory.
For details, refer to “To delete abnormal
data from the built-in flash memory”
(page 57).
Try using another computer.
If track cannot be played, you can erase it
from the built-in flash memory.
For details, refer to “To delete abnormal
data from the built-in flash memory”
(page 57).
Transfer the normal audio file back to the
computer and then format your Network
Walkman. For details, refer to “To delete
abnormal data from the built-in flash
memory” (page 57).
Format the built-in flash memory using
the “Format” menu of the Network
Walkman. For details, refer to “To delete
abnormal data from the built-in flash
memory” (page 57).
To operate the Network Walkman, set the
Slide Cover to the center position (normal
mode) (page 30).
You must charge the battery (page 12).
Format the built-in flash memory using
the Network Walkman. For details, refer
to “To delete abnormal data from the
built-in flash memory” (page 57).
Troubleshooting