Filter
Top Products
15
Playing Discs
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with the disc.
Connect the AC adaptor or install the battery
pack.
1 Open the player’s LCD panel.
Set the LINE SELECT switch on the
player’s right side to “OUT” and set the
CD/DVD USB switch on the player’s left
side to “CD/DVD.”
2 Press [/1 on the remote or slide
the [/1/HOLD switch of the player
to the right.
The player turns on and the power
indicator lights up in green.
3 Slide the OPEN knob to the left and
open the disc lid.
4 Insert the disc to be played.
Push with the playback side down until it
clicks.
5 Push the PUSH CLOSE on the
player to shut the disc lid.
6 Press H.
Playback starts.
• Some discs may start playing
automatically after the disc lid is shut.
• Depending on the disc, a menu may
appear on the screen. For DVD
VIDEOs, see page 17. For VIDEO
CDs, see page 20.
• After all titles have been played, the
player will stop itself and the display
will return to the menu screen.
Notes
• If the disc is inserted with playback side up, a “No
Disc” or “Cannot play this disc.” message
appears.
• Discs created on DVD recorders must be correctly
finalized to play on this player. For more
information about finalizing, refer to the
operating instructions supplied with the DVD
recorder.
RETURN OPTIONSMENUDISPLAY
OPEN
HOLD
CHARGE
x
H
OPEN knob \/1/HOLD
123
456
78
0
9
\/1
H
x
Playback side facing down
,continued