Sony DSX-A30 MP3 Player User Manual


 
22
Error displays/Messages
CHECKING
The unit is confirming the connection of a
USB device.
Wait until confirming the connection is
finished.
ERROR
There may be an internal malfunction.
–Press  for more than 2
seconds (the display disappears), then press
 again.
ERROR-01
There may be an internal malfunction.
Check the connection. If the error indication
remains on in the display, consult your
nearest Sony dealer.
The connection of speakers/amplifiers is
incorrect.
See the installation/connections manual of
this model to check the connection.
ERROR-99
There may be an internal malfunction.
–Press  for more than 2
seconds (the display disappears), then press
 again. If the error
indication remains on in the display, consult
your nearest Sony dealer.
NO MUSIC
The USB device does not contain a music file.
Connect a USB device with a music file in it.
NO NAME
An album/artist/track name is not written in
the USB.
NO SUPRT (Not Supported)
USB hub is not supported on this unit.
The connected USB device is not supported.
For details on the compatibility of your USB
device, visit the support site.
NO USB
USB is selected as source without a USB device
connected. A USB device or a USB cable has
been disconnected during playback.
Be sure to connect a USB device and USB
cable.
OVERLOAD
USB device is overloaded.
Disconnect the USB device, then change the
source by pressing .
Indicates that the USB device is out of order,
or an unsupported device is connected.
READ
The unit is reading all track and album
information on the USB device.
Wait until reading is complete and playback
starts automatically. Depending on the USB
device structure, it may take more than a
minute.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.