Filter
Top Products
19
You can use the following power sources:
• Rechargeable batteries
• AC power adaptor (see “Playing a CD”)
• LR6 (size AA) alkaline batteries (external
battery case)
For the battery life and charging time of the
rechargeable batteries, see “Specifications.”
Using the rechargeable
batteries
Charge the rechargeable batteries before
using them for the first time. You can use
only the following rechargeable batteries for
your CD player.
• NC-6WM
1
Open the battery compartment lid
inside your CD player.
2
Insert two rechargeable batteries
by matching the 3 to the diagram
in the battery compartment and
close the lid until it clicks into
place.
3
Connect the AC power adaptor to
the EXT BATT/DC IN 4.5 V jack of
your CD player and an AC outlet,
then press x/CHARGE to start
charging.
B
Connecting to a power source
Connecting to a power source
(Continued)
x/CHARGE
button•CHARGE
lamp
to an AC outlet
AC power adaptor
to EXT BATT/
DC IN 4.5V
Charging of the batteries starts.
In the display of the remote control,
“Charging” indication flashes and the
indicator sections of light up in
succession. The CHARGE lamp lights
up on the CD player.
When the batteries are completely
charged, all indications in the display
disappear and the CHARGE lamp goes
off.
If you press x/CHARGE after the
charge has already been completed, the
indicator flashes and “FULL”
appears in the display.
4
Disconnect the AC power adaptor.