Filter
Top Products
19
You can use the following power sources:
• Rechargeable batteries
• AC power adaptor (see “Playing a CD”)
• LR6 (size AA) alkaline batteries (external
battery case)
For the battery life and charging time of the
rechargeable batteries, see “Specifications.”
Using the rechargeable
batteries
Charge the rechargeable batteries before
using them for the first time. You can use
only the following rechargeable batteries for
your CD player.
• NC-6WM
• NH-14WM
1
Open the battery compartment lid
inside your CD player.
2
Insert two rechargeable batteries
by matching the 3 to the diagram
in the battery compartment and
close the lid until it clicks into
place.
3
Connect the AC power adaptor to
the EXT BATT/DC IN 4.5 V jack of
your CD player and an AC outlet,
then press x/CHG to start
charging.
If the AC power adaptor does not fit the
AC outlet, use the AC plug adaptor.
The CD player charges the batteries. The
indicator sections of in the display
of the remote control light up in
succession and the CHG/HOLD lamp
lights up.
When the batteries are completely
charged, all indications in the display
disappear and the CHG/HOLD lamp
goes off.
If you press x/CHG after the charge has
already been completed, the
indicator flashes and “FULL” appears in
the display.
4
Disconnect the AC power adaptor.
B
Connecting a power source
to an AC outlet
to EXT BATT/
DC IN 4.5 V
x/CHG button
Put the end of the
ribbon inside.
Connecting a power source
(Continued)
CHG/HOLD lamp
AC power adaptor