Filter
Top Products
CFD-S03CP/S03CPL.GB.3-700-814-21(1)
Using the display
You can check information about the CD using the
display.
Checking the information of an audio
CD
To check the total track number and playing
time of the CD
Press
twice, and you can check them in the display.
Total track number
Total playing time
Checking the information of an MP3
disc
To check the total folder number and total
file number on the CD
Press
twice, and you can check them in the display.
Total file
number
Total folder
number
To check file information
Press DISPLAY•ENTER
on the unit while playing an
MP3 disc. The display changes as follows:
The current file number and playing time
The song title and artist name
The Artist name
The album name*
If the file does not have ID3 tag information, “No title”, “No artist”,
“No album”, appears in the display.
* If there is no folder, “ROOT” appears.
Playing tracks/MP3 files
repeatedly (Repeat Play)
You can play tracks/MP3 files repeatedly in normal,
shuffle or program play modes.
1 Press CD
on the unit.
“CD” appears in the display.
2 Proceed as follows.
To repeat Do this
A single
track/MP3
file
1 Press REPEAT
on the unit until
“ 1” appears.
2 Press
or
to select the track/
MP3 file that you want to repeat.
3 Press
.
All tracks/
MP3 files
on the CD
1 Press REPEAT
on the unit until “ ”
appears.
2 Press
.
A selected
folder (MP3
disc only)
1 Press MODE
on the unit to display
“FLDR” and then press REPEAT
on
the unit until “ ” appears.
2 Select the folder by pressing + or –
on the unit.
3 Press
.
Tracks/MP3
files in
random
order
1 Start Shuffle Play (see “Playing tracks/
MP3 files in random order”).
2 Press REPEAT
on the unit until
“SHUF” and “ ” appear.
3 Press
.
Files in a
selected
folder in
random
order (MP3
disc only)
1 Start Folder Shufle Play (see “Playing
tracks/MP3 files in random order”).
2 Press REPEAT
on the unit until
“FLDR”, “SHUF” and “ ” appear.
3 Press
.
Programed
tracks/MP3
files
1 Program tracks/MP3 files (see “Creating
your own program”).
2 Press REPEAT
on the unit until “ ”
and “PGM” appear.
3 Press
.
To cancel Repeat Play
Press REPEAT
on the unit until “ ” disappears from
the display.
Other Operations
Playing tracks/MP3 files in
random order (Shuffle Play)
You can play tracks/MP3 files in random order. When
playing an MP3 disc, you can also play MP3 files in a
selected folder in random order (Folder Shuffle Play).
1 Press CD
on the unit.
“CD” appears in the display.
2 Press MODE
on the unit until “SHUF” appears
in the display.
When you select Folder Shuffle Play (MP3 disc
only), press MODE on the unit until “FLDR” and
“SHUF” appear in the display. Then press + or
– on the unit to select a folder you want.
3 Press
to start Shuffle Play.
To cancel Shuffle Play
Stop playing first. Then press MODE
on the unit until
“SHUF” disappears from the display.
Tips
• During Shuffle Play, you cannot select the previous track/MP3 file
by pressing
.
• The resume function does not work during Shuffle Play.
Creating your own program
(Program Play)
You can arrange the playing order of up to 15 tracks/
MP3 files on a CD.
1 Press CD
on the unit.
“CD” appears in the display.
2 Press MODE
on the unit until “PGM” appears
in the display.
3 Press
or
then press
DISPLAY•ENTER
on the unit for the tracks
you want to program in the order you want.
For MP3 files, press + or – first and then press
or
and DISPLAY•ENTER .
Audio CD
Programed track
number
Playing order
MP3 disc
Programed file
number
Playing order
4 Press
to start Program Play.
To cancel Program Play
Stop playing first. Then press MODE
on the unit until
“PGM” disappears from the display.
To check the order of tracks/MP3 files
before play
Press DISPLAY•ENTER
on the unit.
Every time you press the button, the track/MP3 file
number appears in the programed order.
To change the current program
Press
once if the CD is stopped and twice if the
CD is playing. The current program will be erased.
Then create a new program following the programing
procedure.
Tips
• If you try to program 16 tracks/MP3 files or more, “FULL” will
appear in the display.
• You can play the same program again, since the program is saved
until you open the CD compartment or turn off the unit.
• You can record your own program. After you’ve created the
program, insert a blank tape and press
on the unit to start
recording.
• The resume function does not work during Program Play.
Presetting radio stations
You can store radio stations into the player’s memory.
You can preset up to 30 radio stations (CFD-S03CP), 20
for FM and 10 for AM in any order, or 40 radio stations
(CFD-S03CPL), 20 for FM, 10 for MW and 10 for LW
in any order.
1 Press RADIO•BAND•AUTO PRESET
on the
unit to select the band.
2 Hold down RADIO•BAND•AUTO PRESET
on
the unit for 2 seconds until “AUTO” flashes in the
display.
3 Press DISPLAY•ENTER
on the unit.
The stations are stored in memory from the lower
frequencies to the higher ones.
If a station cannot be preset automatically
You need to preset a station with a weak signal manually.
1 Press RADIO•BAND•AUTO PRESET
on the
unit (BAND
on the remote) to select the band.
2 Tune in a station you want.
3 Hold down DISPLAY•ENTER
on the unit for
2 seconds until the preset number flashes in the
display.
4 Press PRESET + or –
until the preset number
you want for the station flashes in the display.
5 Press DISPLAY•ENTER
on the unit.
The new station replaces the old one.
Tip
The preset radio stations remain in memory even if you unplug the
AC power cord or remove the batteries.
Playing preset radio stations
1 Press RADIO•BAND•AUTO PRESET
on the
unit (BAND
on the remote) to select the band.
2 Press PRESET + or –
to tune in the stored
station.
Falling asleep to music
1 Play the music source you want.
2 Press SLEEP
on the unit to display “SLEEP”.
3 Press SLEEP
on the unit to select the
minutes until the player goes off automatically.
Each time you press the button, the indication changes
as follows:
“AUTO*” “60MIN” “30MIN” “20MIN”
“10MIN” “OFF”.
* When you select “AUTO”, the CD or tape stops playing in 90
minutes at most and the player goes off automatically. When you
are listening to the radio, the radio goes off in 90 minutes.
If 4 seconds have passed after you pressed SLEEP
on the unit, the minutes in the display are entered.
When the preset time has passed, the player goes off
automatically.
To cancel the sleep function
Press OPERATE (or POWER)
to turn off the power.
Note
When you are playing a tape using this function:
If the tape length of one side is longer than the set time, the player
will not go off until the tape reaches the end.
Precautions
Discs that this unit CAN play
• Audio CD
• CD-R/CD-RW (CD-DA*/MP3 files)
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is a
recording standard used for Audio CDs.
Discs that this unit CANNOT play
• CD-R/CD-RW other than those recorded in music CD
format or MP3 format conforming to ISO9660 Level
1/Level 2 or Joliet
•
CD-R/CD-RW of poor recording quality, CD-R/CD-RW
that has scratches or are dirty, or CD-R/CD-RW recorded
with an incompatible recording device
•
CD-R/CD-RW which is finalized incorrectly
Notes on discs
• Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out. If there is a scratch,
dirt or fingerprints on the CD, it may cause tracking
error.
• Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
• Do not expose the CD to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in
direct sunlight as there can be a considerable rise in
temperature inside the car.
• Do not stick paper or sticker on the CD, nor scratch the
surface of the CD.
• After playing, store the CD in its case.
On safety
• As the laser beam used in the CD player section is
harmful to the eyes, do not attempt to disassemble the
casing. Refer servicing to qualified personnel only.
• Should any solid object or liquid fall into the player,
unplug the player, and have it checked by qualified
personnel before operating it any further.
• Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this player. Attempting to do
so may damage the player. Do not use such discs.
On power sources
• For AC operation, check that the player’s operating
voltage is identical with your local power supply (see
“Specifications”) and use the supplied AC power cord;
do not use any other type.
• The player is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the player itself has been turned off.
• Unplug the player from the wall outlet when it is not be
used for an extended period of time.
• When the batteries are not to be used, remove them to
avoid damage that can be caused by battery leakage or
corrosion.
• The nameplate indicating operating voltage, power
consumption, etc. is located at the bottom.
On placement
• Do not leave the player in a location near heat sources,
in a place subject to direct sunlight, excessive dust or
mechanical shock or in a car subject to the direct rays
of the sun.
• Do not place the player on an inclined or unstable
place.
• Do not place anything within 10 mm of the side of the
cabinet. The ventilation holes must be unobstructed for
the player to operate properly and prolong the life of its
components.
• Since a strong magnet is used for the speakers, keep
personal credit cards using magnetic coding or
spring-wound watches away from the player to prevent
possible damage from the magnet.
On operation
• If the player is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lens inside the CD player section.
Should this occur, the player will not operate properly.
In this case, remove the CD and wait about an hour for
the moisture to evaporate.
• If the player has not been used for a long time, set it
in the playback mode to warm it up for a few minutes
before inserting a cassette.
Notes on cassettes
• Break off the cassette tab from side A or B to prevent
accidental recording. If you want to reuse the tape for
recording, cover the broken tab with adhesive tape.
Side A
Tab for side A
Tab for side B
• The use of a cassette with more than 90 minutes of play
time is not recommended except for long, continuous
recording or playback.
Cleaning the cabinet
• Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder, or
solvent, such as alcohol or benzine.
If you have any questions or problems concerning your
player, please consult your nearest Sony dealer.
Troubleshooting
General
The power is not on.
• Connect the AC power cord to the wall outlet securely.
• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if they are
weak.
• You cannot turn on the player with the remote when
you operate the player on batteries.
There is no audio.
•
Unplug the headphones when listening through speakers.
Noise is heard.
• Someone is using a portable telephone or other
equipment that emits radio waves near the player.
Move the portable telephone, etc., away from the
player.
CD/MP3 player
The CD does not play or “NO DISC” is
displayed even when a CD is in place.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD compartment open
for about an hour to dry moisture condensation.
• The CD-R/CD-RW is blank.
• There is a problem with the quality of the CD-R/
CD-RW, recording device or application software.
• Replace all the batteries with new ones if they are
weak.
The sound drops out.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged.
• Place the player in a location free from vibration.
• Clean the lens with a commercially available blower.
• The sound may drop out or noise may be heard when
using poor quality CD-R/CD-RW or if there is a
problem with the recording device or application
software.
Starting playback takes more time than
usual.
• The following discs take a longer time to start
playback.
– a disc recorded with a complicated tree structure.
– a disc that has not been finalized (a disc to which data
can be added).
– a disc that has many folders or non-MP3 files.
Radio
Reception is poor.
• Reorient the antenna to improve FM reception.
• Reorient the player itself to improve AM or MW/LW
reception.
The audio is weak or has poor quality.
• Replace all the batteries with new ones if they are
weak.
• Move the player away from the TV.
• If you are using the remote while listening to AM or
MW/LW radio, noise may be heard.
The picture of your TV becomes unstable.
• If you are listening to an FM program near the TV with
an indoor antenna, move the player away from the TV.
Tape player
The tape does not move when you press an
operation button.
• Close the cassette compartment securely.
The button
does not function or the
tape does not play or record.
• Make sure the safety tab on the cassette is in place.
Poor or distorted playback, recording or
erasing quality.
• Clean the heads by using dry- or wet-type cleaning
cassette (available separately) after every 10 hours of
use, before you start an important recording, or after
playing an old tape. Failure to clean the tape heads
can cause degraded sound quality or an inability of
the unit to record or play tapes. For details, refer to the
instructions of the cleaning cassette.
• The TYPE II (high position) or TYPE IV (metal) tape
is being used. Use TYPE I (normal) tape only.
• Demagnetize the heads using a commercially available
tape head demagnetizer.
• Replace all the batteries with new ones if they are
weak.
Remote
The remote does not function.
• Replace all the batteries in the remote with new ones if
they are weak.
• Make sure that you are pointing the remote at the
remote sensor on the player.
• Remove any obstacles in the path of the remote and the
player.
• Make sure the remote sensor is not exposed to strong
light such as direct sunlight or fluorescent lamp light.
• Move closer to the player when using the remote.
After trying the remedies, if you still have problems,
unplug the AC power cord or remove all the batteries.
After all the indications in the display disappear, plug
the AC power cord or insert the batteries again. If the
problem persists, please consult your nearest Sony
dealer.