Filter
Top Products
19
RM-X60M
RM-X11M
The following controls on the marine remote
commander require a different operation from
the unit.
• VOLUME (VOL) +/– button(s)
The same as the control dial on the unit.
• GP/ALBM –/+ button(s)
The same as (1)/(2) (ALBUM –/+) on the
unit.
• MUTING button
To attenuate the sound. (The same as (ATT) on
the card remote commander.)
Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
The following controls on the rotary commander
require a different operation from the unit.
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
• PRESET/DISC control
CD/USB: The same as (1)/(2) (ALBUM –/+)
on the unit (push in and rotate).
Radio: To receive stored stations (push in and
rotate).
• VOL (volume) control
The same as the control dial on the unit (rotate).
• SEEK/AMS control
The same as (SEEK) +/– on the unit (rotate, or
rotate and hold).
• DSPL (display) button
To change display items.
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
1 While pushing the VOL control, press and
hold (SEL).
MODE
VOLUME
+/–
SOURCE
MUTING
(ATT)
OFF
GP/ALBM
–/+
SEEK –/+
MODE
VOL +/–
OFF
GP/ALBM
–/+
SEEK –/+
SOURCE
S
E
L
D
S
P
L
M
O
D
E
S
E
L
D
S
P
L
M
O
D
E
OFF
ATT
SEL
SOURCE
DSPL
MODE
OFF
VOL
SEEK/AMS
PRESET/
DISC
To increase
To decrease