Filter
Top Products
21
Locating a station by
name — List-up
1 Press (LIST).
The name assigned to the station currently
tuned appears in the display.
2 Press either side of (DISC/PRST)
repeatedly until you find the desired
station.
When no name is assigned to the selected
station, the frequency appears in the
display.
3 Press (ENTER) to tune in the desired
station.
Notes
• Once the station name or frequency has been
displayed for five seconds, the display goes back
to its normal mode. To turn off the display, press
(LIST).
• When you connect a TV tuner, the list-up
indication will not appear in the display of the
unit.
DSP
Setting the equalizer
You can select an equalizer curve for five
music types (Rock, Vocal, Groove, Techno, and
Custom).
You can store and adjust the equalizer settings
for frequency and level.
Selecting the equalizer curve
1 Press (SOURCE) to select a source (tuner,
CD, or MD).
2 Press (SOUND) repeatedly until “EQ”
appears.
Each time you press (SOUND), the item
changes as follows:
EQ (equalizer curve) t POS (listening position)
t BAL (right-left) t F (front speaker volume)
t R (rear speaker volume) t
SUB (subwoofer volume) t VOL (volume) t
EQ (equalizer curve)
3 Press either side of (SEEK/AMS) to select
the desired equalizer curve.
Each time you press (SEEK/AMS), the item
changes as follows:
Rock y Vocal y Groove y Techno y Custom
y off y Rock
To cancel the equalizing effect, select “off.”
After three seconds, the display returns to
the normal playback mode.