Slick CR312 Clock Radio User Manual


 
www.slickusa.com
Manufactured by Southern Telecom Inc. Brooklyn NY. 11232
Slick is a registered trademark of Southern Telecom Inc.
Brooklyn, NY USA
© 2008 Southern Telecom Inc. All rights reserved.
iPod is a trademark of Apple Inc., registered in the USA and other countries
This product is not designed, manufactured, endorsed, or licensed by Apple Inc.
90 Day Limited Warranty
In the unlikely event that this product is defective, or does not perform
properly , you may within ninety (90) days from your original date of purchase
return it to the authorized service center for repair or exchange.
TO OBTAIN WARRANTY SERVICE:
● Provide proof of the date of purchase within the package
(Dated bill of sale).
● Prepay all shipping costs to the authorized service center, and
remember to insure your return.
● Include a return shipping address (no P.O. Boxes), a telephone
contact number, and the defective unit within the package.
● Describe the defect or reason you are returning the product.
Your product will be repaired or replaced, at our option, for the same or
similar model of equal value if examination by the service center
determines this product is defective. Products received damaged as a
result of shipping will require you to file a claim with the carrier.
The shipping address of the authorized service center is:
Southern Telecom Inc.
ATTN: Returns Department
14-C 53rd Street
Brooklyn, NY 11232
Should you have any questions or problems concerning this product, please
contact our customer service department, email at cs@slickusa.com.
To obtain service after the warranty period, please email cs@slickusa.com
with product information,date of purchase and nature of the problem.
Customer service will reply to the email with service instructions.
Warranty service not provided
This warranty does not cover damage resulting from accident, misuse,
abuse, improper installation or operation, lack of reasonable care, and
unauthorized modification. This warranty is voided in the event any
unauthorized person opens, alters or repairs this product. All products
being returned to the authorized service center for repair must be suitably
packaged.
Limitation of Warranty:
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY
APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE)
ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN
INFORMATION GIVEN BY SOUTHERN TELECOM INC. IT’S AGENTS,
OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS WARRANTY.
● REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY
IS THE EXCLUSIVE REMEDY OF THE CONSUMER. SOUTHERN
TELECOM INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF
WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE
LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON
THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY
PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion nor limitation of incidental or
consequential damages, or limitations on how long an implied warranty
lasts so the above limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you also may have other rights
that vary from state to state.
Warranty information
Product maintenance
Follow the guidelines below to properly maintain this product:
● Avoid putting it near heating appliances and devices that generate
electrical noise (for example: motors or fluorescent lamps).
● DO NOT expose to direct sunlight or moisture.
● Avoid dropping the unit and/or other rough treatment.
● Clean with a soft cloth
● Never use a strong cleaning agent or abrasive powder because this will
damage the finish.
● Retain the original packaging in case you need to ship it at a later date.
Figure 3.
3.5 mm AUX-IN plug
Figure 2.
MP3 cradle
Listnening to mp3 players
To listen to music from you mp3 player follow the steps below:
1. Place the mp3 player between the rubber flaps of the mp3 cradle.
(Figure 2)
2. Connect the built-in 3.5 mm [AUX-IN] plug to your mp3 player’s headset
jack. (Figure 3)
3. Set the function selector to the [AUX] position.
4. Turn the [VOLUME] wheel left to the desired level.
Listnening to the radio
1. Set the function selector to the [RADIO] position.
2. Set the [BAND] selector to either the FM or AM position.
3. Turn the [VOLUME] wheel left to turn on the radio and adjust the volume.
4. Turn the [TUNING] wheel to select your desired station.
NOTE: For best FM reception, position the FM aerial antenna located on
the rear side of your unit so that the best reception is received.
The unit has a built-in ferrite aerial antenna for AM signal, move or
rotate your unit to obtain the best reception.
Sleep function
The SLEEP function will allow the radio to play 59 minutes (or 1 hour and
and 59 minutes) before the radio turns itself off. Follow the steps below
to set the sleep function:
1. Set the function selector to the [BUZZER] position.
2. Turn the [VOLUME] wheel left to the desired level.
3. Press the [SLEEP] button, the display will show 59 minutes and the
radio will start to play.
4. Pres the [SLEEP] button together with the [HOUR] button to start the
count down at 1 hour and 59 minutes.
NOTE: Press the [SLEEP] button again to restart at 59 minutes.
5. Press the [SLEEP] button together with the [MIN] button until the display
shows the desired amount of time you want the radio to play before
shutting itself off.
6. To turn the radio off before the playing time has expired, simply press
the [SNOOZE] button.
NOTE: The sleep function will not affect the wake-up operation of the clock.
1. To reset the alarm, press the [ALARM] button during alarm operation.
The alarm will shut for that day only, and will wake you up the next day
at the same time (the alarm on indicator will still be lit).
2. To shut the alarm, set the function selector to [AUX] or [RADIO] and
turn the [VOLUME] wheel right until you hear a click (volume off
position).
Shutting/resetting the alarm