Filter
Top Products
Sportster SP-C1 User Guide
5
Installation in a Vehicle
good visibility of and access to
the SP-R1 Receiver’s front
panel.
• It is strongly recommended that
you mount the SP-R1 Receiver
using the provided Adhesive
Mount. For best adhesion, the
mounting surface should be as
flat as possible.
• Use the 4 provided screws to
attach the Adhesive Mount to
the back plate of the cradle.
• Clean your selected area with
the included surface
preparation swab, remove the
backing paper from the bottom
of the adhesive mount and
then firmly press the mount
against the cleaned area.
2. Plug the car power adapter into
the back of the Docking Station.
Don’t plug the adapter into the
cigarette lighter until the
installation is completed.
Connecting to your Car Stereo
1. If your car stereo has an AUX input,
plug the supplied audio cable into
the back of the cradle. Plug the
audio cable’s white (L ch) and red
(R ch) connectors into your car
stereo.
2. Alternatively, you can use the
integrated FM transmitter to connect
your Sportster Receiver. Please
see the SP-R1 User Guide for more
information on configuring the FM
transmitter. Tune your car’s radio to
the appropriate frequency to listen
to the Receiver.