Filter
Top Products
[ Installation ]
11
Alternate Mounting Methods
The mounting plate can be removed allowing the SCC1C
to be mounted directly to a surface using either double
stick tape, Velcro or other adhesive material. Simply remove
the 2 screws on the bottom of the SCC1C tuner to remove
the bracket as in Figure 3 below. If using adhesive material,
avoid covering the SID label.
Combining with a SiriusConnect Interface device
Some third-party interfaces are designed with the same asymmetrical chassis as the SCC1C.
To connect the units together, simply remove the mounting brackets from each unit, rotate
them 90° and connect as show in Figures 4 and 5 below
Figure 3
Figure 4
Figure 5
SiriusConnect
Interface
SCC1C Tuner