Filter
Top Products
[ Operation ]
24
with the newly stored channel.
Recalling Channel Presets
The 10 presets in the active bank (A, B, or C) can be selected by pressing the 0 through 9
buttons.
Press the BAND button to activate the preset bank you want. The selected bank is
shown in the lower right corner of the default display screen.
Press the desired preset button 0–9 to recall the preset. The channel will change and
the display will revert to the default display screen for the new channel, with the preset
shown in the lower right corner.
Jump Button
The SIRIUS Sportster receiver features a special button called Jump . This button can be
programmed to jump to a channel which is accessed frequently and temporarily such as traf-
fic, weather, news, or sports. This button allows you to quickly tune to a specific channel and
then tune back to the original channel by pressing the button again. (Figure 6)
Refer to the Jump Settings section in the Menu Options section for information on configur-
ing the Jump button.
If the jump button is set to Traffic, pressing the Jump button will take you to your stored
traffic channel. If your traffic report is not immediately available, the band indicator on the
display will change to the jump icon to indicate a jump is active. Once your local traffic report
is ready, the receiver will automatically tune to your stored traffic channel. You may have to
wait a few minutes for your desired report.
1.
2.
Figure 6Figure 6