Filter
Top Products
- 7 -
Disassembly
To disassemble the kitchen radio, press the two retaining •
levers at the rear of the appliance downwards. Then pull
the radio out to the front and remove it.
Unscrew the screws and remove the assembly plate.•
Setting up the kitchen radio
Do not set the kitchen radio up without the mounting plate q.
Otherwise the speakers are covered and the sound is scarcely
audible.
To set up the kitchen radio with the enclosed mounting plate q:
1. Simultaneously press the two retaining levers on the back
of the appliance down.
Push the mounting plate q back and remove it.
2. Push the two retainer lugs on the mounting plate q into
the recesses on the lower rear side of the kitchen radio.
3. Firmly press the front part of the mounting plate q down
until you hear it engage. You can now set up the radio.
Setting up the appliance
First take all appliance components from the packaging and
remove all packing foil and tape.
Inserting the back-up batteries
The back-up batteries ensure that the time, date and alarm
time setting are not lost in the event of a power cut. For this
you require two 1.5 V batteries of the type AAA/Micro.
They are not supplied.
1. Open the lid of the battery compartment o on the under-
side of the kitchen radio.
2. Insert the batteries. Make sure the polarities are correct.
3. Close the lid of the battery compartment o.
The lid must audibly engage.
Note:
The back-up batteries must be checked at least once
per year and, if necessary, exchanged for new ones.
IB_KH2296_33303_LB6.indb 7IB_KH2296_33303_LB6.indb 7 13.07.2009 9:43:25 Uhr13.07.2009 9:43:25 Uhr