Sharper Image EC-P115 MP3 Docking Station User Manual


  Open as PDF
of 6
 
Alarm 2 button
1. Press the al 2 button on the bottom of the unit. The al 2 icon will appear on
the LCD display to indicate the alarm2 is activated.
2. Press and hold the al 2 button for 3 seconds, hour digits will begin ashing.
Press the and buttons to select the desired hour.
3. Press the al 2 button again, minute digits will begin flashing. Press the and
buttons to select your desired minutes.
4. Press the al 2 button for the third time to exit the alarm setting mode or after 5
seconds the display will stop flashing to indicate the alarm is set.
5. Press the “al mode” button until the wake mode icon appears on the LCD
display to indicate the wake mode of your choice: iPod or beep tone.
6. Press the al 2 button on the bottom of the unit again to deactivate the al 2.
The al 2 icon will disappear from the display.
Dimmer Control
Press the dimmer button located on top of the unit to adjust the backlight
intensity of the LCD display from hi-low-off.
Snooze Operation
Press the snooze/nap/sleep bar on top of the unit while the alarm is sounding.
The alarm will be silenced and return 9 minutes later. Snooze can be pressed
several times during the 1 hour alarm cycle. You may use this feature until you turn
the alarm OFF.
Nap Operation
The Nap function will wake you after a nap of 15, 30, 45 or 60 minutes – without
the need to change your regular al 1 or al 2 settings.
1. If the system is playing audio, press the power button to turn OFF.
2. Toggle through the snooze/nap/sleep bar to the corresponding time of your
choice: 15, 30, 45 or 60 minutes – as it will show on the LCD display.
3. Toggle through the “al mode” button on the bottom of the unit until the
corresponding wake mode (iPod or beep) icon of your choice lights up on the
LCD display. The alarm bell ( ) icon will show next to the selected mode.
4. The alarm will sound to wake you up after the selected number of minutes has
passed.
5. To cancel the Nap timer, press the snooze/nap/sleep bar until OFF shows
on the LCD display, which indicates the Nap function is disarmed.
8 9
 previous