13
2011 October 4
DK-CL8PH ENAUS_A6_p01-p20.fm
DK-CL8PH(BK)
DK-CL8PH(GR)
DK-CL8PH(PK)
Radio
Listening to the radio
■ Tuning
Notes:
●
When radio interference occurs, auto scan tuning may stop
automatically at that point.
●
Auto tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING
( or )
button
again.
●
This product can receive FM Stereo amd FM Monaural broadcast.
■ Programming a station
You can store 40 FM stations in memory.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNC. button repeatedly to select the Tuner
function.
3 Tune to the desired station.
Manual tuning:
Press the TUNING ( or ) button to tune into the
desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more
than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
TUNING
ALARM
RESET
ON/STAND-BY
1 Perform steps 1 - 3 “Tuning” on page 13.
2 Press the CLOCK/MEM. button for more than 2
seconds to enter the preset tuning saving mode.
3 Within 30 seconds, press the or button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4 Within 30 seconds, press the CLOCK/MEM. button to
store that station in memory.
If the preset number indicators disappear before the
station is programmed, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change
a preset station.
When a new station is stored in memory, the station
previously programmed for that preset channel number
will be erased.
MON
MON MON