Filter
Top Products
Before installing and using the unit, please read these
instruction carefully. Be sure to keep it handy for later
reference.
Before using this unit, please check all the connected
devices power supply specifications. Depending on the type
of connected devices, this unit may not operate properly.
CONNECTIONS
1 Connect the power output cable (+, –) from the AC
adaptor to the DC input terminals on the camera.
NOTE: Be sure to carefully check the polarity of the
power output cable in order to make the proper
connections. (Please refer to the illustration on
the rating label.)
2 Insert the plug of this power supply into a wall outlet.
When finished
Unplug the AC adaptor from the wall outlet, then
disconnect the power output cable from the camera.
SPECIFICATIONS
Input voltage : AC 220 ~ 230 V, 50 Hz
Power output : DC 15 V 600 mA
Power consumption
: 17 VA max.
Operating environment temperature
: –10˚C to 50˚C
Dimensions
: 68 (W) x 62 (H) x 100 (D) mm
Weight : Approx. 680 g
DIMENSIONS: mm
Features and specifications are subject to change without
prior notice or obligations.
PRECAUTIONS
In case of problem
Do not use the unit if smoke or a strange odour comes from the
unit, or if it seems not to function correctly. Disconnect the power
cord immediately, and consult your dealer (or a Sanyo Authorized
Service Centre).
Do not open or modify
Do not open the cabinet, as it may be dangerous and cause
damage to the unit. For internal settings and repairs, consult your
dealer (or a Sanyo Authorized Service Centre).
Do not put objects inside the unit
Make sure that no metal objects or flammable substance get inside
the unit. If used with a foreign object inside, it could cause a fire,
short-circuits or damages.
If water or a liquid gets inside the unit, disconnect the power cord
immediately, and consult your dealer (or a Sanyo Authorized
Service Centre). Be careful to protect the unit from rain, sea water,
etc.
Be careful when handling the unit
To prevent damages, do not drop the unit or subject it to strong
shock or vibration.
Protect from humidity and dust
To prevent damages to the unit, do not install it where there is
greasy smoke or steam, where the dampness may get too high, or
where there is a lot of dust.
Protect from high temperatures
Do not install close to stoves, or other heat generating devices,
such as spotlights, etc., or where it could be subject to direct
sunlight, as that could cause deformation, discoloration or other
damages.
Be careful when installing close to the ceiling, in a kitchen or boiler
room, as the temperature may raise to high levels.
Install where the temperature range will stay between –10˚C and
50˚C. (no condensation)
Cleaning
• Dirt can be removed from the cabinet by wiping it with a soft
cloth. To remove stains, wipe with a soft cloth moistened with a
soft detergent solution and wrung dry, then wipe dry with a dry
soft cloth.
• Do not use benzine, thinner or other chemical product on the
cabinet, as that may cause deformation and paint peeling.
Before using a chemical cloth, make sure to read all
accompanying instructions. Make sure that no plastic or rubber
material comes in contact with the cabinet for a long period of
time, as that may cause damage or paint peeling.
100
1,830
1,830
68
62
Power output cable
L8AC5/XE (VCA-35E) GB, 2000, 2, 17
INSTRUCTIONS
AC adaptor
VCA-35E
ENGLISH