Filter
Top Products
8
Operating your radio AM
1. Connecting the antenna
The radio comes with built-in AM antenna which should be
enough for normal listening. To improve the AM reception,
you may connect the outdoor AM antenna with AM antenna
terminal (USA version only).
2. Turn on your radio by switching the Power knob to AM position.
3. Rotate the Tuning Control to select the desired station. On AM,
the tuning scale is marked in kHz (Kilohertz). The tuning LED
will appear brightest when best tuning has been achieved.
4. Rotate your radio for best reception.
5. Adjust the Volume Control for comfortable listening.
6. To switch off your radio , turn the power knob to OFF position.
Headphone use
Headphone use with this radio should be fitted with a 3.5 mm jack
plug. Insert the headphones plug into the socket marked on the
rear side of the radio. When the headphones are plugged in, the
loudspeaker is automatically disconnected.
AUX IN socket
Connect a stereo or mono audio source (like CD walkman) to this
input to listen the audio program via the speaker.
GB