Filter
Top Products
7
Recalling preset stations
1. Press the Power button to turn on the radio.
2. Select the required waveband by pressing the Band button.
3. Momentarily press the required Preset button, the preset number
and station frequency will appear in the display.
Tuning step change
In Europe and other parts of the world MW( AM ) tuning steps are
9 kHz, in America the MW( AM ) tuning step is 10 kHz.
On FM step can be set to either 50 or 100 kHz ( standard version )
and 100 or 200 kHz ( USA version ).
To change tuning step
1. Ensure that your radio is switched off.
2. Press and hold down the Step/Preset button 3 for 2 sec.,
the display will show current FM tuning step. Continue holding
down the Step/Preset button 3 for 7 seconds. Your radio will beep
and the display will flash FM and current tuning step.
3. Press the Tuning Up/Down button to change required
FM tuning step.
4. Press the Step/Preset button 3 to display MW ( AM ) tuning step,
display will show AM and flash current tuning step.
5. Press the Tuning Up/Down button to change required MW ( AM )
tuning step.
6. Complete the setting by pressing the Step/Preset button 3.